Filter By Wave size
- 18in (45cm)
- 12in (30cm)
Filter By Choose Your Package
- Xtreme 3 Storey
- Xtreme 4 Storey
Filter By Accessory Type
- Type 2 (Screw on)
- Type 1 (Pole Insert)
- Traditional
- Top Arm
- Swivel
- Super Scraper
- Rinse Bars
- QuicK-LoQ
- Pole Clamps/Levers
- Pole Bags
- Euro
- End Caps
- Carbon/Alloy
- Brush Socket
- Adaptor's
Filter By Bristle Type
- Single Trim
- Side Bristle's
- Flocked
- Dual Trim
Filter By Brush Shape
- Radial/Sill
- Flat/Square
Filter By Spare Jet Holes
- None
- 2 Pair
- 1 Pair
- 1 Only
Filter By Select Pole Tube Length
- 5m
Filter By Hose Pack size
- 50m of Premium Silver Green 12mm Hose
Filter By Brush Size
- 5" (12cm)
- 18" (45cm)
- 14" (35cm)
- 12" (30cm)
- 10" (25cm)
Filter By Size
- 1.5 metres
-
Filter By Category
- Traditional (45)
- Accessories (10)
- Chemicals (3)
- Cloths, Pads & Holders (9)
- Extension Poles (17)
- Gutters, Brushes & Dusting (5)
- Scrapers (1)
- Water-Fed (355)
- Brushes / Pad Holders (60)
- Hose & Pole Tube Fittings (57)
- Hose Reels, Hose & Tube (27)
- Indoor Window Cleaning (24)
- Pole Fittings & Goosenecks (51)
- Pure Water System Plumbing Supplies (5)
- Pure Water Treatment Systems (34)
- Resin, Filters & Accessories (18)
- Tanks & Backpacks (4)
- Telescopic Poles (58)
- Water Conservation / Valves (8)
- Water Fed Packages (9)
-
Filter By Stock
- In Stock (280)
Filter By Brand
- Baintech (1)
- Claber (18)
- Edco (1)
- Gardiner Pole Systems (159)
- John Guest (1)
- Pope (2)
- Unger (12)
- Verdi (2)
- Vontron (1)
- Wagtail Cleaning Tools (3)
- WCW (47)
- Xion (4)
Water-Fed
10in x 2.5in Sediment Filter 5 micron
NOT for SINGLE pre-filter DI Systems
SKU: WPSF10
Brand: WCW
Twin Tank 2 x 12.5 litre DI Pure Water System
This new system from Window Cleaning World maximises the amount of pure water you get from your resin.
Comes with the WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.
SAVE ON Resin Costs by up to 30%
Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.
- No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
- Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
- Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
- Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
- No tools required for removing tanks for resin change - it is a simple 10 minute job.
- Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used. Please note that the flow rate is not accurate as it is designed for flows between 3-100 ltr/min. Typical WFP use is about 1-2 litres/min. After a while you will be able to gauge resin use better by the flow totals. Keep a record...
- Please note: Combo TDS Meter and the Dual TDS Meter are NOT waterproof. DO not leave exposed to the weather, on the back of a ute for example. The electronics also cannot handle direct sunlight. Cover with a cloth or keep in the shade
- Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
- Includes 2 separate pre-filters - sediment and carbon filters
- Inlets and outlet fitting swivel in all directions - stops hoses from kinking
- Excludes DI Resin - needs 25 litres to fill both tanks
$7.50
10M Pole Hose Kit
Choose your Attachments
SKU: WFPHK10
From $34.50
10mm push fit High Flow Pole Tube to Hose connector
for 10mm OD tube
SKU: WFPFPHC10mm
Brand: WCW
$13.50
10mm Push Fit Reducing TEE (8-10-8)
For high flow 10mm pole tubing
SKU: WF8-10-8TEE
$3.00
10mm to 8mm Reducing Push Fit Straight Joiner
10mm to 8mm reducing
SKU: WF8to10Joiner
Brand: WCW
$3.00
10mm to 8mm Reducing Push Fit Y (8-10-8)
For high flow 10mm pole tubing
SKU: WF8-10-8Y
$3.00
12mm Comfort Grip Hose Connector Set
12mm hose connections
SKU: WFPOQC12mmSet
Wagtail Longreach Straight Extension Arm
The Longreach Arm is a versatile adapter that gives extra reach.
Insert into your Wagtail squeegee to extend an additional 18cm for accessing hard-to-reach windows.
- The Longreach Arm is lightweight enough so if you prefer extra long-handled tools attach the Longreach Arm to create a longer handle giving you a larger area to grip without adding extra weight.
- The Longreach Arm enables you to get into tight spots and awkward crevasses and is perfect for pole work, especially when working close to the window and space is minimum.
- Particularly useful for rope access window cleaning and balcony cleaning.
- All Wagtail tools simply push-fits onto the tapered end of the Longreach Arm and can be used alone or push-fitted onto a window cleaning pole.
Length: 23cm/9" (18cm/7" when inserted into Wagtail tools)
Lightweight 60 grams
$14.50
12mm Swivel Tap Adaptor
No More Annoying Hose Twist
SKU: WFSTA12mm
Brand: Pope
Move Your Hose Around Freely
$8.50
15M Pole Hose Kit
Choose your Attachments
SKU: WFPHK15
From $39.50
20M Pole Hose Kit
Choose your Attachments
SKU: WFPHK20
From $44.50
25L Cube Barrel with lid
Suits the X-Ion TT1
SKU: WCW25LBarrel
$20.00
25M Pole Hose Kit
Choose your Attachments
SKU: WFPHK25
From $49.50
Blue High Flow PU Pole Tube - 5m lengths
Choose multiples of 5 metres
SKU: WFPUtube10x5mblue
Brand: WCW
$9.00
Brass 4-Way Anti-Vandal Tap Key
SKU: WF4WAYTAPKEY
$15.00
Claber 1/2in Tap Adapter
15mm Screw on Thread
SKU: CLTA12
Brand: Claber
$3.00
Claber 12mm Lead Hose 1.5m
Includes 1" - 3/4" Tap Adapter to suit Australian Taps
SKU: CL12mmLH
Brand: Claber
$15.00
Claber 1in Tap Adapter
1in
SKU: CLTA1in
Brand: Claber
Fits Standard Garden Taps
$2.50
Claber 2-way hose splitter with valves
Get 2 poles going off 1 main feed hose
SKU: CLTWHS
Brand: Claber
$12.00
Claber 3/4" Tap Adapter
20mm Screw on Thread
SKU: CLTA34
Brand: Claber
Installs onto DI Tank Inlet/Outlet
$3.00
Claber 3/4in Sprinkler Connect
SKU: CLSC
Brand: Claber
$2.00
Claber Kiros Hose Reel Kits
SKU: CLHRKIROS_KITS
Brand: Claber
From $34.50
Claber Quick Connect Joiner
SKU: CLQCJoin
Brand: Claber
$2.00
Claber Tap Adapter 3/4" to 1"
SKU: CLTA34-1
Brand: Claber
$4.50
EZ Snap Hose Valve 6mm barb
To fit 6mm Microbore Hose
SKU: GDEZHVF6mm
Brand: Gardiner Pole Systems
$25.00
EZ-Snap Male and Female Barb Stop Fitting
Connect Hose to Tube
SKU: GDEZ_KIT
Brand: Gardiner Pole Systems
Connect Female to Male
$16.60
Gardiner 6mm Microbore Hose - 50M Coil
6mm - 50 Metres
SKU: GDH6mm50M
Brand: Gardiner Pole Systems
Virtually Indestructible!
$90.00
Gardiner Brush Bumper 35cm (SL, Ultimate, Xtreme)
Protect your Brush, Protect the Frames!
$15.00 EX GST
Gardiner Brush Bumper 35cm (SL, Ultimate, Xtreme)
Protect your Brush, Protect the Frames!
SKU: GDSLBB35
Brand: Gardiner Pole Systems
$15.00
Gardiner CL-X12
The Ultimate Trad Pole
SKU: GDCLX12
Brand: Gardiner Pole Systems
$195.00
Gardiner CLX-10
10ft - 3m - 3 Section Trad Pole
SKU: GDCLX10KIT
Brand: Gardiner Pole Systems
Trad Tool Tip Included!
The *NEW* Gardiner 65% Carbon CLX-27 Waterfed Pole
- Exclusive to Window Cleaning World
- 6 section telescopic hybrid carbon pole
- 27ft actual length (8.1m)
- Weight 1720 grams
- Includes the all new Gardiner Smart Clamps
- Can be extended to 31ft with #7 section (available separately)
- Will easily do a 2 storey commercial building
- PRODUCT INCLUDES POLE ONLY. Add on an extra pole tip, pole hose kit or brush to complete your waterfed pole kit!
$170.00
Gardiner CLX12ft Triple Extension pack
#4-#6, 3.65m
SKU: GDCLX12FTEXT
Brand: Gardiner Pole Systems
$225.00
Gardiner Control Bars #12
Attach to a #12 pole section
SKU: GDULTCB12
Brand: Gardiner Pole Systems
$150.00
Gardiner Control Bars #14
Attach to a #14 pole section
SKU: GDULTCB14
Brand: Gardiner Pole Systems
Cement-Off Concrete Dissolver
An environmentally friendly solution designed to remove cementitious products such as cured concrete, stucco and grout from any surface. Safe for use on glass, tile, flooring, baseboards, equipment, vehicles and more. Can be used for self-leveling materials that contain cement. Will not harm metals.
$150.00
Gardiner EZ-Wrap
Simple snap on hose wrap
SKU: GDEZWRAP
Brand: Gardiner Pole Systems
$1.50
Gardiner Micro Brush Flocked
5" (12cm)
SKU: GDBMicroF
Brand: Gardiner Pole Systems
Ready to Plug Into Your Hose
$56.50
Gardiner MicroJet Rinse Bar 14in
Suits 14in (35cm) Brushes
SKU: GDMJRB35
$56.50
Gardiner Minibore 8mm Hose 80m Coil
Premium 8mm ID Hose
SKU: GDH8mm80m
Brand: Gardiner Pole Systems
$140.00
Gardiner Powerwash Pole Adapter
1/4in - 3/8in
SKU: GDPWPA38in
$25.00
Gardiner Powerwash Pole Adapter
1/4in - 1/4in
SKU: GDPWPA14in
Brand: Gardiner Pole Systems
$25.00
Gardiner Quick-LoQ #10 Clamp Mount
SKU: GDQL10Mount
$20.00
Gardiner QuickLoQ Action Camera Mount
SKU: GDQLACM
$15.00
Gardiner QuickLoQ Gutter Scoop Half Curve
SKU: GDQLGSHC
$18.50
Gardiner QuickLoQ Gutter Scoop Universal Flat Base
SKU: GDQLGSUFB
$18.50
Gardiner QuickLoQ Pole Tip Straight
SKU: GDQLPT
$16.50
Complete with Pad, Jets, Jet Tube and Tee
Gardiner QuickLoQ Water Through Pad Holder
Gardiner Scrubbing Power
$28.00 EX GST
Gardiner QuickLoQ Water Through Pad Holder
Gardiner Scrubbing Power
SKU: GDQLWTPH
Complete with Pad, Jets, Jet Tube and Tee
$28.00
Gardiner SMax 3K Triple Extension #7-9
No. 7-9 Sections
SKU: GDSM3KTRPEXT7-9
Brand: Gardiner Pole Systems
Adds 4.12M
The *NEW* Gardiner 65% Carbon CLX-27 Waterfed Pole
- Exclusive to Window Cleaning World
- 6 section telescopic hybrid carbon pole
- 27ft actual length (8.1m)
- Weight 1720 grams
- Includes the all new Gardiner Smart Clamps
- Can be extended to 31ft with #7 section (available separately)
- Will easily do a 2 storey commercial building
- PRODUCT INCLUDES POLE ONLY. Add on an extra pole tip, pole hose kit or brush to complete your waterfed pole kit!
$595.00
Gardiner Super-Lite Brush Bumper 10in (25cm)
Protect your Brush, Protect the Frames!
SKU: GDSLBB
Brand: Gardiner Pole Systems
$14.50
Gardiner Super-Lite Dual Trim Flocked 10in Brush
2x 2mm Jets - 10in (25cm)
SKU: GDBSLDTFJC
Brand: Gardiner Pole Systems
$68.50
Gardiner Super-Max 27
100% HiMod 3K Carbon Pole
SKU: GDSMAX27-3K_KIT
Brand: Gardiner Pole Systems
The *NEW* Gardiner 65% Carbon CLX-27 Waterfed Pole
- Exclusive to Window Cleaning World
- 6 section telescopic hybrid carbon pole
- 27ft actual length (8.1m)
- Weight 1720 grams
- Includes the all new Gardiner Smart Clamps
- Can be extended to 31ft with #7 section (available separately)
- Will easily do a 2 storey commercial building
- PRODUCT INCLUDES POLE ONLY. Add on an extra pole tip, pole hose kit or brush to complete your waterfed pole kit!
$950.00
Gardiner SuperLite DualTrim 100% DuPont Nylon
10" (25cm)
SKU: GDBSLDTDPJC
Brand: Gardiner Pole Systems
Brand New Jet Capsule Design
$82.50
Gardiner SuperMax 3K Replacement Sections
Section #1-#4
SKU: GDSMAX3KSECTIONS
Brand: Gardiner Pole Systems
From $210.00
Gardiner Supreme Brush Bumper 10in (25cm)
Protect your Brush, Protect the Frames!
SKU: GDSPBB
Brand: Gardiner Pole Systems
$15.00
Gardiner Supreme Dupont Hybrid Brush
10" (25cm)
SKU: GDBSPDH
Brand: Gardiner Pole Systems
Ready to Plug Into Your Hose
Gardiner Ultimate 45cm Medium Soft brush
- Ultimate balance between weight, coverage & durability
- Dual Trim Mono-Filament in Medium to Soft bristles - good for all-round cleaning
- Weighs 297g
- Width 45cm (18")
- Suitable for use with water temperatures up to 45˚C
- Comes standard with 4 x 2mm pencil jets
- Comes with 6mm jet tubing to connect all jets
- Comes with a 4-way push-fit fitting that receives standard 8mm pole tube
- Check "We Also Recommend" items below, for Push Fit Valve Fitting and other fan and pencil jet options
$68.50
Gardiner Ultimate Brush DuPont Hybrid 10in
10" (25cm)
SKU: GDBULTDH
Brand: Gardiner Pole Systems
Ready to Plug Into Your Hose
Glidex Extension Poles - 3 Section (9ft - 15ft)
- Best aluminium poles on the market
- Australian made
- Slotted sections are strong and never twist
Sizes:
- 9ft (2.7m) 3 Sections
- 15ft (4.5m) 3 Sections
$80.00
Excellent for Solar Panel Cleaning!
Gardiner Ultimate DuPont Single Trim 35cm Brush
4x 2mm Jet - 14in (35cm) Brush
$89.50 EX GST
Gardiner Ultimate DuPont Single Trim 35cm Brush
4x 2mm Jet - 14in (35cm) Brush
SKU: GDBULT35DPST
Brand: Gardiner Pole Systems
Excellent for Solar Panel Cleaning!
$89.50
Gardiner Ultimate Flocked 35cm Brush
4x 2mm Jet - 14in (35cm) Brush
SKU: GDBULT35F
Brand: Gardiner Pole Systems
$87.50
Gardiner Ultimate Flocked 45cm Brush
4x 2mm Jet - 18" (45cm)
SKU: GDBULT45F
Brand: Gardiner Pole Systems
Gardiner Ultimate 45cm Medium Soft brush
- Ultimate balance between weight, coverage & durability
- Dual Trim Mono-Filament in Medium to Soft bristles - good for all-round cleaning
- Weighs 297g
- Width 45cm (18")
- Suitable for use with water temperatures up to 45˚C
- Comes standard with 4 x 2mm pencil jets
- Comes with 6mm jet tubing to connect all jets
- Comes with a 4-way push-fit fitting that receives standard 8mm pole tube
- Check "We Also Recommend" items below, for Push Fit Valve Fitting and other fan and pencil jet options
$102.50
Excels at Everyday Window Cleaning
Gardiner Ultimate Medium Soft 35cm Brush
4x 2mm Jet - 14" (35cm) Brush
$77.50 EX GST
Gardiner Ultimate Medium Soft 35cm Brush
4x 2mm Jet - 14" (35cm) Brush
SKU: GDBULT35MS
Brand: Gardiner Pole Systems
Excels at Everyday Window Cleaning
$77.50
Gardiner Ultimate Medium Soft 45cm Brush
4x 2mm Jet - 18in (35cm) Brush
SKU: GDBULT45MS
Brand: Gardiner Pole Systems
$102.50
Ready to Plug Into Your Hose
Gardiner Ultimate Stiff 35cm Brush
4x 2mm Jet - 14in (35cm) Brush
$87.50 EX GST
Gardiner Ultimate Stiff 35cm Brush
4x 2mm Jet - 14in (35cm) Brush
SKU: GDBULT35STIFF
Brand: Gardiner Pole Systems
Ready to Plug Into Your Hose
Gardiner Ultimate 45cm Medium Soft brush
- Ultimate balance between weight, coverage & durability
- Dual Trim Mono-Filament in Medium to Soft bristles - good for all-round cleaning
- Weighs 297g
- Width 45cm (18")
- Suitable for use with water temperatures up to 45˚C
- Comes standard with 4 x 2mm pencil jets
- Comes with 6mm jet tubing to connect all jets
- Comes with a 4-way push-fit fitting that receives standard 8mm pole tube
- Check "We Also Recommend" items below, for Push Fit Valve Fitting and other fan and pencil jet options
$87.50