Standard Modular Extension #10

No. 10 Section

SKU: GDSMEXT10

Brand: Gardiner Pole Systems

Adds 5.25 Foot

Gardiner Quick-LoQ Goosneck Valve

• All New Design -  Version 2 - redesigned by Gardiner
• Gardiner Gooseneck Valve with Patented Inner Valve Technology
• "Control is not letting go" - Maintain full 'two-hand' control of the pole whilst controlling the water flow
• Simple and fast twist to actuate action - Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
• Twist on at the top LH corner of the window and Twist off on the bottom RH corner
• Adjustable Tension Control to allow for different brush sizes and pole heights
• Maximum recommended pole height - 50ft
• Can be operated with your hand for use on ground floor windows
• Improves speed of water control compared to a manual valve

• Fitting Instructions

• Remove old gooseneck from the pole
• Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
• Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp - ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
• Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
• Before first use ensure that all of the pole clamps are correctly tightened - it is important that the pole clamps firmly clamp the pole sections when using this valve
• adjust the gooseneck valve adjuster so that it operate with the desired force needed - TIP, when working at height this will need to be loosened off compared to ground and first floor work

• How to Operate

• Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
• When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
• Move to the next window and repeat

• Troubleshooting

• Water is not flowing through the device - ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• Water is not shutting off using the device - ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear - remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• The unit is too stiff to operate - loosen the bolt cap adjuster until desired tension is reached
• The unit is too loose and turns off too easily - tight the bolt cap adjuster until the desired tension is reached

$220.00

Standard Modular Extension #10

No. 10 Section

SKU: GDSMEXT10

Brand: Gardiner Pole Systems

Adds 5.25 Foot

Gardiner Quick-LoQ Goosneck Valve

• All New Design -  Version 2 - redesigned by Gardiner
• Gardiner Gooseneck Valve with Patented Inner Valve Technology
• "Control is not letting go" - Maintain full 'two-hand' control of the pole whilst controlling the water flow
• Simple and fast twist to actuate action - Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
• Twist on at the top LH corner of the window and Twist off on the bottom RH corner
• Adjustable Tension Control to allow for different brush sizes and pole heights
• Maximum recommended pole height - 50ft
• Can be operated with your hand for use on ground floor windows
• Improves speed of water control compared to a manual valve

• Fitting Instructions

• Remove old gooseneck from the pole
• Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
• Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp - ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
• Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
• Before first use ensure that all of the pole clamps are correctly tightened - it is important that the pole clamps firmly clamp the pole sections when using this valve
• adjust the gooseneck valve adjuster so that it operate with the desired force needed - TIP, when working at height this will need to be loosened off compared to ground and first floor work

• How to Operate

• Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
• When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
• Move to the next window and repeat

• Troubleshooting

• Water is not flowing through the device - ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• Water is not shutting off using the device - ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear - remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• The unit is too stiff to operate - loosen the bolt cap adjuster until desired tension is reached
• The unit is too loose and turns off too easily - tight the bolt cap adjuster until the desired tension is reached

$220.00

Gardiner Ultimate 74

74 Foot - 22.5 Metres

SKU: GDULT74_KIT

Brand: Gardiner Pole Systems

Twin 12.5L DI Pure Water Trolley System

This new system from Window Cleaning World maximizes the amount of pure water you get from your resin.

Comes with the WCW Aluniumium Trolley - Lightweight and easy to grab and lift, with a comfortable and adjustable height handle.

SAVE ON Resin Costs by up to 20%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the dissolved salts and sending pre-filtered water to Tank No. 2
• Instead, keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools are required for removing tanks for resin change - it is a simple 10-minute job.
• Please note: Triple TDS Meter is NOT WATERPROOF. Do not leave exposed to the weather, on the back of a ute for example. The electronics also cannot handle direct sunlight. Cover with a cloth or keep in the shade
• Triple TDS meter measures Tap water (after prefiltration), it measures TDS at Tank 1 output and also the final Tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 25 liters to fill both tanks

$6,450.00

Gardiner Xtreme 52

52ft - 15.8m HiMod Carbon Pole

SKU: GDXTR52_KIT

Brand: Gardiner Pole Systems

5 Storey's and Up

$2,995.00

Gardiner QuickLoQ Swivel Brush Socket Adapter

Swivel Brush Socket

SKU: GDSBSA

Brand: Gardiner Pole Systems

Attaches to Gardiner Brushes

$15.00

Gardiner Pole Tip Adaptor

Fits Unger, Moerman, Ettore, Glidex and other pole tips

SKU: WCWGPTA

Brand: WCW

$20.00

Twin 12.5L DI Pure Water Trolley System

With Triple TDS Meter

SKU: WPDITWIN125LTR_KIT_

Brand: WCW

Single 25L DI Pure Water System w/ Trolley

• Perfect for large crews, can handle upto 4 poles at once (depending on mains tap pressure and amount of hose used)
• Takes a full 25 bag of resin 
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Dual TDS meter measures Tap water (after prefiltration) and also the final pure water output. (TDS meter may be different than shown)
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 25 litres to fill tank
•  Flow Meter is no longer used on this unit as shown in the images 

$845.00

X-ION MAX RO

Produces Pure Water for 2 Operators

SKU: XION40RO12V_kit

Brand: Xion

$3,450.00

QuickLoQ Single Jet Holder Connector

Many ways to add this to a QuickLoQ configuration

SKU: GDQLSJHC

Brand: Gardiner Pole Systems

$27.50

NWC Heavy Duty Degreaser

5L Bottle

SKU: NWCDEGREASER5L

$40.00

Gardiner Xtreme 47

47ft - 14.3m HiMod Carbon Pole

SKU: GDXTR47_KIT

Brand: Gardiner Pole Systems

$2,795.00

Gardiner Super-Max-50

50ft (15m) - 3K HiMod Carbon Pole

SKU: GDSMAX503K_KIT

Brand: Gardiner Pole Systems

$2,125.00

Gardiner SL-X47

47ft - 14.3m

SKU: GDSLX47_KIT

Brand: Gardiner Pole Systems

$1,450.00