-
Filter By Stock
- In Stock (17)
Filter By Brand
- Gardiner Pole Systems (18)
Replacement Sections
Gardiner CLX Section #1
Fits Gardiner Poles
SKU: GDCLXEXT1
Brand: Gardiner Pole Systems
CLX Replacement Section
$70.00
Gardiner CLX Section #2
Fits Gardiner Poles
SKU: GDCLXEXT2
Brand: Gardiner Pole Systems
CLX Replacement Section
$75.00
Gardiner CLX Section #3
Fits Gardiner Poles
SKU: GDCLXEXT3
Brand: Gardiner Pole Systems
CLX Replacement Section
$80.00
Gardiner SMax 3K Replacement Sections
Section #1-#4
SKU: GDSMAX3KSECTIONS
Brand: Gardiner Pole Systems
From $210.00
Gardiner X3 Xtreme Section #1
Section #1
SKU: GDXTRX3SEC1
Brand: Gardiner Pole Systems
Replacement Section
$200.00
SLX Extension #1
No.1 Section
SKU: GDSLXEXT1
Brand: Gardiner Pole Systems
Adds 4 Foot
The Sorbo Twin Angle
Take the pain out of cleaning atriums and other hard to reach windows. With the Twin Angle you can attach a scrubber and a squeegee on one handle, eliminating the time consuming procedure of changing tools. Simply scrub, turn over, and squeegee off, easy as 1-2-3. Deep frame commercial windows are a breeze.
$125.00
SLX Extension #2
No.2 Section
SKU: GDSLXEXT2
Brand: Gardiner Pole Systems
Adds 4 Foot
The New Gardiner Xtreme 73ft Waterfed Pole
- 9 section telescopic 100% high modulus carbon fibre pole
- Plus 5 x #10 HiStrength HiMod Extensions
- 68ft actual length (22.07m)
- Weight 4600 grams - The lightest Telescopic Pole on the Planet!
- Includes the all new Gardiner Smart Clamps
- Can be extended to 78ft with extra sections (available separately)
- Will do a 6-7 storey commercial building
- Can do 7 storey buildings at maximum height (with 6 extension sections)
- FREE Quick-LoQ Gooseneck
$135.00
SLX Extension #3
No.3 Section
SKU: GDSLXEXT3
Brand: Gardiner Pole Systems
Adds 4 Foot
$145.00
SLX Extension #4
No.4 Section
SKU: GDSLXEXT4
Brand: Gardiner Pole Systems
Adds 4 Foot
Gardiner X3 Xtreme Section #1
- Replacement section #1 for Gardiner X3 Xtreme poles
- Includes joint taps, clamp and smart clamp level
$155.00
SLX Extension #5
No.5 Section
SKU: GDSLXEXT5
Brand: Gardiner Pole Systems
Gardiner X3 Xtreme Section #1
- Replacement section #1 for Gardiner X3 Xtreme poles
- Includes joint taps, clamp and smart clamp level
$165.00
CLX Extension #5
No. 5 Section
SKU: GDCLXEXT5
Brand: Gardiner Pole Systems
Adds 4ft (122cm)
$110.00
CLX Extension #6
No. 6 Section
SKU: GDCLXEXT6
Brand: Gardiner Pole Systems
Adds 4ft (122cm)
CLX Extension #5
- Adds 4ft (122cm)
- 320g
- Turns CLX-18 into a CLX-22
$120.00
CLX Extension #7
No. 7 Section
SKU: GDCLXEXT7
Brand: Gardiner Pole Systems
Adds 4ft (122cm)
DI Tank Components
Tank Head
- 2.5" opening, 3/4in ports suitable for Single DI Vessels
- 1" (25mm) Ports Suitable for Twin Tanks
- Screws onto DI tanks
- Tank head only. Add Straight joiners and elbows to modify your tank.
10in Filter Housing
- 3/4" In and Out Ports
- Includes Bracket, Screws and Filter Wrench
Tank Handle
- Replacement part
- Screws onto DI Tank Valve
- Screw on gradually
20mm Ball Valve with Butterfly Handle
- Screws onto 20mm thread
20mm Hex Nipple
- Screws into 3/4" DI Tanks
- Use as a joiner
20mm Male-Female Elbow
- Screws into DI Components or a 20mm straight male-to-male joiner
Claber 3/4" Threaded Tap Adapter
- Screw-on thread
- Fits our DI tanks
- Installs onto DI Tank Inlet/Outlet
- Also fits some laundry sinks
Pink Thread Tape
- Wrap around threaded components to avoid leaks
Dual Inline TDS Meter
- Install inline to your DI or RO System for constant TDS readings
- One channel for input water and one for output water
DigiFlow Combo TDS/Fow Meter
- Manual TDS / conductivity test
- Automatic TDS / conductivity monitor
- Flow rate indicating
- Flow totalization
- 1" BSP connection
$125.00
SLX Extension #7
No. 7 Section
SKU: GDSLXEXT7
Brand: Gardiner Pole Systems
Adds 4.5 Foot
SLX Extension #9
- Adds 4.25ft (130cm)
- 420g
- Does NOT include a rubber end cap.
$195.00
SLX Extension #8
No. 8 Section
SKU: GDSLXEXT8
Brand: Gardiner Pole Systems
Adds 4.4 Foot
DI Tank Components
Tank Head
- 2.5" opening, 3/4in ports suitable for Single DI Vessels
- 1" (25mm) Ports Suitable for Twin Tanks
- Screws onto DI tanks
- Tank head only. Add Straight joiners and elbows to modify your tank.
10in Filter Housing
- 3/4" In and Out Ports
- Includes Bracket, Screws and Filter Wrench
Tank Handle
- Replacement part
- Screws onto DI Tank Valve
- Screw on gradually
20mm Ball Valve with Butterfly Handle
- Screws onto 20mm thread
20mm Hex Nipple
- Screws into 3/4" DI Tanks
- Use as a joiner
20mm Male-Female Elbow
- Screws into DI Components or a 20mm straight male-to-male joiner
Claber 3/4" Threaded Tap Adapter
- Screw-on thread
- Fits our DI tanks
- Installs onto DI Tank Inlet/Outlet
- Also fits some laundry sinks
Pink Thread Tape
- Wrap around threaded components to avoid leaks
Dual Inline TDS Meter
- Install inline to your DI or RO System for constant TDS readings
- One channel for input water and one for output water
DigiFlow Combo TDS/Fow Meter
- Manual TDS / conductivity test
- Automatic TDS / conductivity monitor
- Flow rate indicating
- Flow totalization
- 1" BSP connection
$220.00
SLX Extension #9
No. 9 Section
SKU: GDSLXEXT9
Brand: Gardiner Pole Systems
Adds 4.25 Foot
SLX Extension #10
- Adds 4.2ft (125cm)
- 435g
$240.00
SLX Extension #10
No. 10 Section
SKU: GDSLXEXT10
Brand: Gardiner Pole Systems
Adds 4.2 Foot
$250.00
SLX Extension #6
No. 6 Section
SKU: GDSLXEXT6
Brand: Gardiner Pole Systems
Adds 4 Foot
$185.00