Filter By Accessory Type
- End Caps
-
Filter By Stock
- In Stock (20)
Filter By Brand
- Gardiner Pole Systems (21)
Extension Sections
Gardiner CL-X Section #2
Fits Gardiner CL-X Poles Only
SKU: GDCLXEXT2
Brand: Gardiner Pole Systems
CLX Replacement Section
$75.00
Gardiner CL-X Section #3
Fits Gardiner CL-X Poles Only
SKU: GDCLXEXT3
Brand: Gardiner Pole Systems
CLX Replacement Section
$80.00
Gardiner Pole Cap
Sizes #2 to #10
SKU: GDEC
Brand: Gardiner Pole Systems
Protect Your Pole!
From $3.50
Gardiner CL-X Section #4
Fits Gardiner CL-X Poles Only
SKU: GDCLXEXT4
Brand: Gardiner Pole Systems
CLX Replacement Section
$85.00
Add 4ft - 1.2m to your CL-X18
Gardiner CLX Extension #5
Fits Gardiner CL-X Poles Only
$135.00 EX GST
Gardiner CLX Extension #5
Fits Gardiner CL-X Poles Only
SKU: GDCLXEXT5
Brand: Gardiner Pole Systems
Add 4ft - 1.2m to your CL-X18
$135.00
Add 4ft - 1.2m to your CL-X22
Gardiner CLX Extension #6
Fits Gardiner CL-X Poles Only
$140.00 EX GST
Gardiner CLX Extension #6
Fits Gardiner CL-X Poles Only
SKU: GDCLXEXT6
Brand: Gardiner Pole Systems
Add 4ft - 1.2m to your CL-X22
Gardiner MicroJet Rinse Bar 35cm (14in)
- 22 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any 35cm Gardiner brush
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 58g
- Uses standard Brush T Connector and jet hose - optional extra
- Needs 2 longer screws to allow it to be attached between brush body and brush socket
- Standard brushes will require 19mm screws, Xtreme Brushes MUST use 16mm screws, 19mm is too long and can potentially scratch glass
- Please note: The rinse bar does not come with the brush & gooseneck picture
$140.00
Gardiner CL-X #4-#5 - 6ft Extension Pack
Add on to your CL-X8 or CL-X10
SKU: GDCLX6FTEXT
Brand: Gardiner Pole Systems
$150.00
Add 4ft - 1.2m to your CL-X27
Gardiner CL-X Extension #7
Fits Gardiner CL-X Poles Only
$145.00 EX GST
Gardiner CL-X Extension #7
Fits Gardiner CL-X Poles Only
SKU: GDCLXEXT7
Brand: Gardiner Pole Systems
Add 4ft - 1.2m to your CL-X27
Sorbo Accessory Pouch
Perfect for holding a small razor scraper and a piece of steel wool to remove fingerprints and small patches of stubborn dirt. The SÖrbo Accessory Pouch comes in handy to hold these. It keeps the steel wool dry and protects your clothes from rust stains.
$145.00
Gardiner CL-X4-6 Extension Pack
Adds 12ft to your CL-X8 or CL-X10
SKU: GDCLX12FTEXT
Brand: Gardiner Pole Systems
$265.00
Gardiner SL-X Extension #6
Add to your SLX-25
SKU: GDSLXEXT6
Brand: Gardiner Pole Systems
Quick-Loq Gooseneck Replacement Inner Valve Assembly
- Inner Valve Assembly for Gooseneck Valve
- Allows for the complete replacement of the inner working on a Gooseneck Valve
- 6 month operational warranty on assembly
- Tested to 10,000+ operational cycles
- 2 Part Valve Connector
- 15cm Light Green Hose
- 1x Earless fitted crimp ring
$185.00
Gardiner SL-X Extension #7
Add to your SLX 27 or 6 Stage Pole
SKU: GDSLXEXT7
Brand: Gardiner Pole Systems
SLX Extension #2
- Adds 4ft (127cm)
- 350g
$195.00
Gardiner SL-X Extension #8
Add to your SLX-35 or 7 Stage Pole
SKU: GDSLXEXT8
Brand: Gardiner Pole Systems
18″/45cm Round-Top Soft Squeegee Rubber
- High quality squeegee rubber replacement
- A popular choice of professional window cleaners throughout the world for the last 15 years
- BlackDiamond Round-Top Soft is a rubber replacement that fits Wagtail, Ettore, Steccone, Moerman, Unger and other round profile channels.
- Ready cut lengths up to 102cm (40")
- Natural moulded rubber
- Unique double moulding and cutting of rubber inside the mold. Simply pull the a pair of rubbers apart. The all important edge stays better protected when stored as a pair.
$220.00
Gardiner SL-X Extension #9
Add to your SLX 8 Stage Pole
SKU: GDSLXEXT9
Brand: Gardiner Pole Systems
SLX Extension #2
- Adds 4ft (127cm)
- 350g
$240.00
Gardiner SL-X 4-6 Extension Pack
Add 12ft (3.6m) to your SL-X8
SKU: GDSLX12FTEXT
Brand: Gardiner Pole Systems
$370.00
Gardiner SMax 3K Triple Extension #7-9
No. 7-9 Sections
SKU: GDSM3KTRPEXT7-9
Brand: Gardiner Pole Systems
Adds 4.12M
$680.00
Super Max Triple Extension Pack - #10-12
No. 10-12 Sections
SKU: GDSM3KTRPEXT1012
Brand: Gardiner Pole Systems
Adds 4.4M
$850.00
Gardiner Xtreme X3 35 Extension Pack
Extends Xtreme 22 or 25
SKU: GDXTR35EXT-X3
Brand: Gardiner Pole Systems
$650.00
Extra 3.05 Extended Length
X3 Xtreme 44ft Extension pack
Makes a 35 Foot Extreme into a 44 foot
$760.00 EX GST
X3 Xtreme 44ft Extension pack
Makes a 35 Foot Extreme into a 44 foot
SKU: GDXTREXT44-X3
Brand: Gardiner Pole Systems
Extra 3.05 Extended Length
$760.00
Standard Modular Extension #10
No. 10 Section
SKU: GDSMEXT10
Brand: Gardiner Pole Systems
Adds 5.25 Foot
$220.00
Gardiner Xtreme Hi-Strength #10 Extension
No. 10 Section
SKU: GDXTRHSEXT10
Brand: Gardiner Pole Systems
Adds 6 Foot
Standard Modular Extension #10
- Includes a protective ring, does not necessarily require the use of an end cap
- Adds 5.25ft (160cm)
- 475g
- Designed to work with either SMAX or Xtreme Poles
- Use a maximum of 3 on any pole
- If you need to add more then go for the Hi-Strength #10 sections (up to 6)
$495.00
Gardiner CL-X Section #1
Fits Gardiner CL-X Poles Only
SKU: GDCLXEXT1
Brand: Gardiner Pole Systems
CLX Replacement Section
$70.00