-
Filter By Stock
- In Stock (7)
Filter By Price Range
- $67 or below
- $67 to $114
- $114 to $161
- $161 to $208
- $208 or above
Filter By Price Range
Filter By Brand
- Gardiner Pole Systems (6)
- Wagtail Cleaning Tools (1)
Categories
- Traditional
- High Rise
- Water-Fed
1 Storey
![Gardiner CL-X18](/assets/thumbL/GDCLX18_KIT.jpg?20220323163500)
Gardiner CL-X18
50% Carbon
SKU: GDCLX18_KIT
Brand: Gardiner Pole Systems
Gardiner Quick-LoQ Goosneck Valve
- All New Design - Version 2 - redesigned by Gardiner
- Gardiner Gooseneck Valve with Patented Inner Valve Technology
- "Control is not letting go" - Maintain full 'two-hand' control of the pole whilst controlling the water flow
- Simple and fast twist to actuate action - Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
- Twist on at the top LH corner of the window and Twist off on the bottom RH corner
- Adjustable Tension Control to allow for different brush sizes and pole heights
- Maximum recommended pole height - 50ft
- Can be operated with your hand for use on ground floor windows
- Improves speed of water control compared to a manual valve
-
Fitting Instructions
- Remove old gooseneck from the pole
- Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
- Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp - ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
- Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
- Before first use ensure that all of the pole clamps are correctly tightened - it is important that the pole clamps firmly clamp the pole sections when using this valve
- adjust the gooseneck valve adjuster so that it operate with the desired force needed - TIP, when working at height this will need to be loosened off compared to ground and first floor work
-
How to Operate
- Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
- When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
- Move to the next window and repeat
-
Troubleshooting
- Water is not flowing through the device - ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- Water is not shutting off using the device - ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear - remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- The unit is too stiff to operate - loosen the bolt cap adjuster until desired tension is reached
- The unit is too loose and turns off too easily - tight the bolt cap adjuster until the desired tension is reached
$255.00