The New UNI-VALVE PRO

Use with 8mm ID Pole tube - See Video below for fitting instructions. 

• 2x 9.5 O-Clamps are required to secure the Univalve Pro to your pole tube 
• O-Clamp Pliers make proper crimping of O-Clamps a breeze 
• 8mm Hose Stay Clips will be available shortly - These are very helpful when using a Univalve Pro

What’s different?

Over the years via customer feedback Uni-valves can become problematic due to constant use. Uni-valves run out of grease and become difficult to operate.

What have EX-CEED done to improve Uni-valve?

UNI-VALVE PRO has been Re-designed Internally and Externally. The main feature is the NEW Remote grease port and grease collar to allow lubrication externally. This is better than internal lubrication as the lubricant cannot get flushed out by water. The user no longer needs to take the Uni-valve apart with risk of breakage to service Uni-valve. Also Redesigned is part of the Internal mechanism to allow smoother operation. Three patents have been applied for to protect its unique features.

-------------------

WE STRONGLY RECOMMEND UNI-VALVE IS NOT USED WITH CHEMICALS.
ONLY TO BE USED WITH PURE WATER.
IF USING HOT WATER PLEASE TAKE CARE IN CASE OF BURN OR INJURY.
FAILURE TO COMPLY TO THESE IS AT ONES OWN RISK AND RESPONSIBILITY.