Louvre Rinse Gun

SKU: ELLOUVREGUN

$57.50

6mm/8mm Push Fit Y-fitting

6 - 8 - 6 mm

SKU: WF6-8-6Y

Brand: WCW

2 x 6mm - 1 x 8mm

Gardiner Ultimate Medium-Soft Brush - 10in

• The ultimate balance between weight, coverage & durability
• Dual Trim Mono-Filament in Medium to Soft bristles - good for all-round cleaning
• Suitable for use with water temperatures up to 45˚C
• Comes standard with 2 x 2mm pencil jet capsules
• Comes with 6mm jet tubing to connect all jets
• Comes with a 2-way push-fit fitting that receives a standard 8mm pole tube

$2.50

10mm Push Fit Straight Joiner

SKU: WF10mmSTR

Verdi High Flow 10mm Pole Tube - 5m lengths

•  Tube will be supplied as a single length - i.e. if you choose 3 units you will receive a 15m length of tube 
• Premium, hard-wearing PU Pole Tube
• Recommended for water-fed tools that need A LOT OF FLOW, i.e. Reach-iT brushes with large rinse bars.
• Super Flexible and springy
• Add in the 8-10mm Push-Fit Joiner to connect to Gardiner brushes 
• 10mm OD - 6.5mm ID
• Compatible with 10mm Push Fit Fittings
• Handles all weather conditions and temperatures up to 70 °C
• Not compatible with Univalve
• While this pole tube is very robust and can be used as a delivery hose, pole tubing is typically NOT designed to be used as a hose that lays on the ground - only use enough to get from the ground to the top of the fully extended pole
• Use a proper reinforced hose for water delivery to the area where you are working. Preferably a 6mm - 12mm ID hose that can withstand cars driving over it and being dragged past rose bushes etc...
• Not suitable for use on a hose reel (if left coiled on your hose reel under pressure it may damage your hose reel - Boa Constrictor effect!). A hose reel can be used as storage, just unwind all of the tube before use

$2.80

10mm Push Fit Reducing TEE (8-10-8)

For high flow 10mm pole tubing

SKU: WF8-10-8TEE

Verdi High Flow 10mm Pole Tube - 5m lengths

•  Tube will be supplied as a single length - i.e. if you choose 3 units you will receive a 15m length of tube 
• Premium, hard-wearing PU Pole Tube
• Recommended for water-fed tools that need A LOT OF FLOW, i.e. Reach-iT brushes with large rinse bars.
• Super Flexible and springy
• Add in the 8-10mm Push-Fit Joiner to connect to Gardiner brushes 
• 10mm OD - 6.5mm ID
• Compatible with 10mm Push Fit Fittings
• Handles all weather conditions and temperatures up to 70 °C
• Not compatible with Univalve
• While this pole tube is very robust and can be used as a delivery hose, pole tubing is typically NOT designed to be used as a hose that lays on the ground - only use enough to get from the ground to the top of the fully extended pole
• Use a proper reinforced hose for water delivery to the area where you are working. Preferably a 6mm - 12mm ID hose that can withstand cars driving over it and being dragged past rose bushes etc...
• Not suitable for use on a hose reel (if left coiled on your hose reel under pressure it may damage your hose reel - Boa Constrictor effect!). A hose reel can be used as storage, just unwind all of the tube before use

$3.00