Gardiner Metal 8mm push fit valve
- Strong, durable micro valve for 8mm pole tubing
(GDFV)
Be The First To Review This Product!
Help other Window Cleaning World users shop smarter by writing reviews for products you have purchased.
Others Also Bought
Titan Green
1 Gallon - 3.8L
SKU: TGGAL
Brand: Titan Laboratories
Incredibly versatile & powerful general cleaner
SWAM - Moss, Mold and Mildew Cleaner
5ltr bottle
Soft Wash Australia SWAM has a unique combination of biodegradable selective surfactants for moss removal, mould removal and other soil removal on any exterior surface. When diluted with water and applied, it immediately attacks that unsightly moss, mould, soil and grime. Each time it rains, this safe, cleansing combination reactivates to help flush the moss, mould, soil and grime without scouring the surface it has infested. SWAM is a biocidal eliminator spray and gone formulation. A highly concentrated detergent sanitiser for one-step cleaning and sanitizing of surfaces affected by mould or mildew Ideal for clean up after natural disasters, floods etc.
DO NOT MIX WITH BLEACH (Sodium Hypochlorite)
SWAM can be used on any exterior surface; it’s great for your roof, concrete paths, driveways, bricks and paving, natural stone including sandstone, ceramic pots, pool surrounds, timber weatherboards, painted surfaces, clay and concrete roof tiles, textured coatings, canvas awnings, tennis courts, decramastic, fibrolite cladding, astroturf and aquatic accessories including boats.
• Non-caustic, non-acidic and contains no bleach.
• Helps save water
• Safe for any outdoor surface
• One-step application: Simply spray and walk away! SWAM does the work for you
• Eliminates even the most challenging cases of moss, algae, lichen, mould or mildew
• Long-lasting: Keeps the surface clean for at least 1+ years in most cases
• Bio-degradable
$68.50
Wagtail Orbital Aluminium Squeegee - Complete
12" - 30" (30cm-75cm)
SKU: WAGOS
Brand: Wagtail Cleaning Tools
Great for Precision Polework
Large 22 litre heavy duty Window Cleaners Bucket
- Safety Yellow
- Complete with dual squeegee / washer hangers
- Suitable for 18" strip washers etc.
- Optional lid
- Product is Bucket and Bucket clips ONLY.
From $26.80
Gardiner Quick-LoQ Angle Adapter Type 1 Swivel
Swivels Side to Side
SKU: GDQLRN1S
Brand: Gardiner Pole Systems
Keeps you and the Brush Square
Gardiner Quick-LoQ Goosneck Valve
- All New Design - Version 2 - redesigned by Gardiner
- Gardiner Gooseneck Valve with Patented Inner Valve Technology
- "Control is not letting go" - Maintain full 'two-hand' control of the pole whilst controlling the water flow
- Simple and fast twist to actuate action - Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
- Twist on at the top LH corner of the window and Twist off on the bottom RH corner
- Adjustable Tension Control to allow for different brush sizes and pole heights
- Maximum recommended pole height - 50ft
- Can be operated with your hand for use on ground floor windows
- Improves speed of water control compared to a manual valve
-
Fitting Instructions
- Remove old gooseneck from the pole
- Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
- Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp - ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
- Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
- Before first use ensure that all of the pole clamps are correctly tightened - it is important that the pole clamps firmly clamp the pole sections when using this valve
- adjust the gooseneck valve adjuster so that it operate with the desired force needed - TIP, when working at height this will need to be loosened off compared to ground and first floor work
-
How to Operate
- Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
- When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
- Move to the next window and repeat
-
Troubleshooting
- Water is not flowing through the device - ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- Water is not shutting off using the device - ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear - remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- The unit is too stiff to operate - loosen the bolt cap adjuster until desired tension is reached
- The unit is too loose and turns off too easily - tight the bolt cap adjuster until the desired tension is reached
$25.00
Gardiner Quick-LoQ Taper Adapter
Useful With Traditional Tools
SKU: GDQLTA
Brand: Gardiner Pole Systems
Quick-LoQ to Traditional Tools
Gardiner Quick-LoQ Goosneck Valve
- All New Design - Version 2 - redesigned by Gardiner
- Gardiner Gooseneck Valve with Patented Inner Valve Technology
- "Control is not letting go" - Maintain full 'two-hand' control of the pole whilst controlling the water flow
- Simple and fast twist to actuate action - Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
- Twist on at the top LH corner of the window and Twist off on the bottom RH corner
- Adjustable Tension Control to allow for different brush sizes and pole heights
- Maximum recommended pole height - 50ft
- Can be operated with your hand for use on ground floor windows
- Improves speed of water control compared to a manual valve
-
Fitting Instructions
- Remove old gooseneck from the pole
- Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
- Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp - ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
- Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
- Before first use ensure that all of the pole clamps are correctly tightened - it is important that the pole clamps firmly clamp the pole sections when using this valve
- adjust the gooseneck valve adjuster so that it operate with the desired force needed - TIP, when working at height this will need to be loosened off compared to ground and first floor work
-
How to Operate
- Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
- When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
- Move to the next window and repeat
-
Troubleshooting
- Water is not flowing through the device - ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- Water is not shutting off using the device - ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear - remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- The unit is too stiff to operate - loosen the bolt cap adjuster until desired tension is reached
- The unit is too loose and turns off too easily - tight the bolt cap adjuster until the desired tension is reached
$9.50
Gardiner Erkenomic Pole Tip
For Traditional Tools
SKU: GDRN1ERK
Brand: Gardiner Pole Systems
Gardiner Quick-LoQ Goosneck Valve
- All New Design - Version 2 - redesigned by Gardiner
- Gardiner Gooseneck Valve with Patented Inner Valve Technology
- "Control is not letting go" - Maintain full 'two-hand' control of the pole whilst controlling the water flow
- Simple and fast twist to actuate action - Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
- Twist on at the top LH corner of the window and Twist off on the bottom RH corner
- Adjustable Tension Control to allow for different brush sizes and pole heights
- Maximum recommended pole height - 50ft
- Can be operated with your hand for use on ground floor windows
- Improves speed of water control compared to a manual valve
-
Fitting Instructions
- Remove old gooseneck from the pole
- Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
- Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp - ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
- Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
- Before first use ensure that all of the pole clamps are correctly tightened - it is important that the pole clamps firmly clamp the pole sections when using this valve
- adjust the gooseneck valve adjuster so that it operate with the desired force needed - TIP, when working at height this will need to be loosened off compared to ground and first floor work
-
How to Operate
- Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
- When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
- Move to the next window and repeat
-
Troubleshooting
- Water is not flowing through the device - ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- Water is not shutting off using the device - ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear - remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- The unit is too stiff to operate - loosen the bolt cap adjuster until desired tension is reached
- The unit is too loose and turns off too easily - tight the bolt cap adjuster until the desired tension is reached
$15.00
More From This Category
Red Clip Push-Fit T Connector for Quik-LoQ
Locking C-clip for 8mm push fits
SKU: GDPFRedClip
Brand: Gardiner Pole Systems
Claber 1/2in Tap Adapter
- 15mm Screw-on thread with washer
- Fits on XION RO pump outlets
- Screws onto washing machine and toilet water taps
- Very hard to get in Australia
- Made in Italy
$0.20