Wagtail High Flyer V2

7" - 18" (18cm-45cm)

SKU: WAGHF

Brand: Wagtail Cleaning Tools

Ultimate Combination Tool

The RED "Better Bucket" Rope Access Version

• Includes a 16mm hole in the handle for karabiner placement
• Includes 4mm kernmantle cord woven through the handle as a backup to the handle.
• Prolonged swinging of any bucket will eventually lead to handle failure
• Easily fits any 18in (45cm) wide T-bar, without the need to put it at an angle
• More comfortable to carry as it can be held closer to the body
•  Optional Lid   snaps on and off with ease
• Also comes in BLUE
• Max capacity 22 liters
• Compatible with most bucket accessories such as the Ettore bucket sieve
• Optional karabiners, lanyards and Wagtail HighFlyer at discounted pring

From $46.00

Wagtail Flipper and Wave Pad

Replacement Pad

SKU: WAGBPAD

Brand: Wagtail Cleaning Tools

Maykker Handy Sleeves - Version 2

• Improved Design 
• Simple Velcro on Velcro fastening for extra tight grip on your T-Bar
• Excellent for holding scrub pads, scrims, and detailing cloths
• T-Bar not included - For illustration purposes only

 

From $6.30

16L Water-Fed Backpack Tank

Perfect for Mobile Water-Fed Cleaning!

SKU: RY16LBP

Brand: WCW

DI Tank Components

Tank Head

• 2.5" opening, 3/4in ports suitable for Single DI Vessels
• 1" (25mm) Ports Suitable for Twin Tanks
• Screws onto DI tanks
• Tank head only. Add Straight joiners and elbows to modify your tank.

​10in Filter Housing

• 3/4" In and Out Ports
• Includes Bracket, Screws & Filter Wrench
• Clear or Blue 

Tank Handle

• Replacement part
• Slide onto Butterfly Valve

20mm Ball Valve with Butterfly Handle

• Screws onto 20mm thread

20mm Hex Nipple

• Screws into 3/4" DI Tanks
• Use as a joiner​

20mm Male-Female Elbow

• Screws into DI Components or a 20mm straight male-to-male joiner​

Claber 3/4" Threaded Tap Adapter

• Screw-on thread
• Fits our DI tanks
• Installs onto DI Tank Inlet/Outlet
• Also fits some laundry sinks​

Pink Thread Tape

• Wrap around threaded components to avoid leaks

Dual Inline TDS Meter

• Install inline to your DI or RO System for constant TDS readings
• One channel for input water and one for output water

Triple Inline TDS Meter

 

• Install inline to your DI or RO System for constant TDS readings

$160.00

Unger Pre-Washed Scrim

36" x 36"

SKU: UGSCRIM

Brand: Unger

Premium Grade Irish Linen

Twin 8L DI Pure Water Trolley System

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Please note: The Triple TDS Meter is NOT waterproof. We have provided a splash resistant cover/mount but it is not completely waterproof.  DO not leave exposed to the weather, on the back of a ute for example. The electronics also cannot handle direct sunlight. Cover with a cloth or keep in the shade
• The Triple TDS meter measures Tap water (after prefiltration) and the output of Tank 1 and the final output of Tank 2
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$19.50

Unger Ninja 6" Scraper

6" - 15cm

SKU: UGSCR6

Brand: Unger

Twin 8L DI Pure Water Trolley System

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Please note: The Triple TDS Meter is NOT waterproof. We have provided a splash resistant cover/mount but it is not completely waterproof.  DO not leave exposed to the weather, on the back of a ute for example. The electronics also cannot handle direct sunlight. Cover with a cloth or keep in the shade
• The Triple TDS meter measures Tap water (after prefiltration) and the output of Tank 1 and the final output of Tank 2
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$38.50

Track Cleaner Brush

Timber Handle

SKU: WCWTRBRSH

Brand: WCW

Stiff Bristles

Twin 8L DI Pure Water Trolley System

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Please note: The Triple TDS Meter is NOT waterproof. We have provided a splash resistant cover/mount but it is not completely waterproof.  DO not leave exposed to the weather, on the back of a ute for example. The electronics also cannot handle direct sunlight. Cover with a cloth or keep in the shade
• The Triple TDS meter measures Tap water (after prefiltration) and the output of Tank 1 and the final output of Tank 2
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$7.50

Unger Stingray Indoor Cleaning Kit 330

3.3m reach pole included

SKU: UGSRK330

Brand: Unger

Twin 8L DI Pure Water Trolley System

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Please note: The Triple TDS Meter is NOT waterproof. We have provided a splash resistant cover/mount but it is not completely waterproof.  DO not leave exposed to the weather, on the back of a ute for example. The electronics also cannot handle direct sunlight. Cover with a cloth or keep in the shade
• The Triple TDS meter measures Tap water (after prefiltration) and the output of Tank 1 and the final output of Tank 2
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$599.00

Winclean Resin - 25L Bag

Premium High Capacity - Virgin Mixed - Bed Resin

SKU: DIWR25L

Brand: WCW

DI Tank Components

Tank Head

• 2.5" opening, 3/4in ports suitable for Single DI Vessels
• 1" (25mm) Ports Suitable for Twin Tanks
• Screws onto DI tanks
• Tank head only. Add Straight joiners and elbows to modify your tank.

​10in Filter Housing

• 3/4" In and Out Ports
• Includes Bracket, Screws & Filter Wrench
• Clear or Blue 

Tank Handle

• Replacement part
• Slide onto Butterfly Valve

20mm Ball Valve with Butterfly Handle

• Screws onto 20mm thread

20mm Hex Nipple

• Screws into 3/4" DI Tanks
• Use as a joiner​

20mm Male-Female Elbow

• Screws into DI Components or a 20mm straight male-to-male joiner​

Claber 3/4" Threaded Tap Adapter

• Screw-on thread
• Fits our DI tanks
• Installs onto DI Tank Inlet/Outlet
• Also fits some laundry sinks​

Pink Thread Tape

• Wrap around threaded components to avoid leaks

Dual Inline TDS Meter

• Install inline to your DI or RO System for constant TDS readings
• One channel for input water and one for output water

Triple Inline TDS Meter

 

• Install inline to your DI or RO System for constant TDS readings

$195.00

Single DI Tank Bracket for 8in dia tanks

Works with 7in diameter tanks too

SKU: WPSDITB8in

Brand: WCW

DI Tank Components

Tank Head

• 2.5" opening, 3/4in ports suitable for Single DI Vessels
• 1" (25mm) Ports Suitable for Twin Tanks
• Screws onto DI tanks
• Tank head only. Add Straight joiners and elbows to modify your tank.

​10in Filter Housing

• 3/4" In and Out Ports
• Includes Bracket, Screws & Filter Wrench
• Clear or Blue 

Tank Handle

• Replacement part
• Slide onto Butterfly Valve

20mm Ball Valve with Butterfly Handle

• Screws onto 20mm thread

20mm Hex Nipple

• Screws into 3/4" DI Tanks
• Use as a joiner​

20mm Male-Female Elbow

• Screws into DI Components or a 20mm straight male-to-male joiner​

Claber 3/4" Threaded Tap Adapter

• Screw-on thread
• Fits our DI tanks
• Installs onto DI Tank Inlet/Outlet
• Also fits some laundry sinks​

Pink Thread Tape

• Wrap around threaded components to avoid leaks

Dual Inline TDS Meter

• Install inline to your DI or RO System for constant TDS readings
• One channel for input water and one for output water

Triple Inline TDS Meter

 

• Install inline to your DI or RO System for constant TDS readings

$25.00

Claber Hose Reel Hooks

Mount these on a Trolley or Wall

SKU: CLHOOKS

DI Tank Components

Tank Head

• 2.5" opening, 3/4in ports suitable for Single DI Vessels
• 1" (25mm) Ports Suitable for Twin Tanks
• Screws onto DI tanks
• Tank head only. Add Straight joiners and elbows to modify your tank.

​10in Filter Housing

• 3/4" In and Out Ports
• Includes Bracket, Screws & Filter Wrench
• Clear or Blue 

Tank Handle

• Replacement part
• Slide onto Butterfly Valve

20mm Ball Valve with Butterfly Handle

• Screws onto 20mm thread

20mm Hex Nipple

• Screws into 3/4" DI Tanks
• Use as a joiner​

20mm Male-Female Elbow

• Screws into DI Components or a 20mm straight male-to-male joiner​

Claber 3/4" Threaded Tap Adapter

• Screw-on thread
• Fits our DI tanks
• Installs onto DI Tank Inlet/Outlet
• Also fits some laundry sinks​

Pink Thread Tape

• Wrap around threaded components to avoid leaks

Dual Inline TDS Meter

• Install inline to your DI or RO System for constant TDS readings
• One channel for input water and one for output water

Triple Inline TDS Meter

 

• Install inline to your DI or RO System for constant TDS readings

$8.00

Wall Mount Bracket for 7inch Tanks

Fastening Strap Included!

SKU: WPDIWB_KIT

Brand: WCW

DI Tank Components

Tank Head

• 2.5" opening, 3/4in ports suitable for Single DI Vessels
• 1" (25mm) Ports Suitable for Twin Tanks
• Screws onto DI tanks
• Tank head only. Add Straight joiners and elbows to modify your tank.

​10in Filter Housing

• 3/4" In and Out Ports
• Includes Bracket, Screws & Filter Wrench
• Clear or Blue 

Tank Handle

• Replacement part
• Slide onto Butterfly Valve

20mm Ball Valve with Butterfly Handle

• Screws onto 20mm thread

20mm Hex Nipple

• Screws into 3/4" DI Tanks
• Use as a joiner​

20mm Male-Female Elbow

• Screws into DI Components or a 20mm straight male-to-male joiner​

Claber 3/4" Threaded Tap Adapter

• Screw-on thread
• Fits our DI tanks
• Installs onto DI Tank Inlet/Outlet
• Also fits some laundry sinks​

Pink Thread Tape

• Wrap around threaded components to avoid leaks

Dual Inline TDS Meter

• Install inline to your DI or RO System for constant TDS readings
• One channel for input water and one for output water

Triple Inline TDS Meter

 

• Install inline to your DI or RO System for constant TDS readings

$95.00