Gardiner Widget Tool

Great multi use tool

SKU: GDWIDGET

Brand: Gardiner Pole Systems

$4.50

Jet Capsules

1.4mm-3mm and 50/100Degrees

SKU: GDJC

Brand: Gardiner Pole Systems

From $14.50

Push Fit Elbow 6mm

Low Profile Brush Modification

SKU: GDPFELB6mm

Gardiner MicroJet Rinse Bar 35cm (14in)

• 32 micro jets provide precise but gentle rinsing with brush on the glass
• Fits between brush and brush socket on any 35cm Gardiner brush
• Provides over-bristle micro jet rinsing
• Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
• Height of jets can be adjusted
• Can be used with internal brush jets as well
• Lightweight at 48g
• Uses John Guest connections on unit
• Uses standard Brush T Connector and jet hose - optional extra
• Needs 2 longer screws to allow it to be attached between brush body and brush socket (if used on standard brushes, will need 19mm screws)
• Please note: The rinse bar does not come with the brush & gooseneck pictured

$3.80

6mm/8mm Push Fit Double TEE

4 x 6mm - 1 x 8mm

SKU: GDPF4WAY

Brand: Gardiner Pole Systems

Connect Brush to Pole Tube

$9.50

6mm/8mm Push Fit TEE

2 x 6mm to 1 x 8mm

SKU: WF6-8-6TEE

Brand: WCW

6mm to 8mm

$2.80

6mm/8mm Push Fit Y-fitting

6 - 6 - 8

SKU: WF6-8-6Y

Brand: WCW

2 x 6mm - 1 x 8mm

Gardiner MicroJet Rinse Bar 35cm (14in)

• 32 micro jets provide precise but gentle rinsing with brush on the glass
• Fits between brush and brush socket on any 35cm Gardiner brush
• Provides over-bristle micro jet rinsing
• Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
• Height of jets can be adjusted
• Can be used with internal brush jets as well
• Lightweight at 48g
• Uses John Guest connections on unit
• Uses standard Brush T Connector and jet hose - optional extra
• Needs 2 longer screws to allow it to be attached between brush body and brush socket (if used on standard brushes, will need 19mm screws)
• Please note: The rinse bar does not come with the brush & gooseneck pictured

$2.50

O Clip Pliers

Tighten O Clips

SKU: WFPINCER

Brand: WCW

Tighten Fittings onto Tube

$14.50

Gardiner Pencil Jets

1.4mm, 2mm or 3mm

SKU: GDBPJ

Brand: Gardiner Pole Systems

Set of 2

From $9.00

Gardiner 50 deg Fan Jets (x2)

45 Degrees

SKU: GDFJWR

Brand: Gardiner Pole Systems

Increase your Rinse Flow!

Gardiner Ultimate Flocked Brush 45cm

• Ultimate balance between weight, coverage & durability
• Only 290 grams - 45cm (18in) width
• This brush comes with 4 2mm Pencil jets with holes for 4 extra jets
• Single trim brush
• Soft bristles with split ends for a "micro-fibre like" action on the glass
• Sprung brush stock (made in UK) allowing equal pressure accross full brush width
• Needs to be held OFF the glass for rinsing
• Comes standard with 4 x 2mm pencil jets
• Comes with 6mm jet tubing to connect all jets
• Comes with a 4-way push-fit fitting that receives standard 8mm pole tube
• Check "We Also Recommend" items below, for Push Fit Valve Fitting and other fan and pencil jet options

$10.00

Gardiner 100 deg Fan Jets (x2)

100 Degrees

SKU: GDFJ100

Brand: Gardiner Pole Systems

Increase your Rinse Flow!

Gardiner Ultimate Flocked Brush 45cm

• Ultimate balance between weight, coverage & durability
• Only 290 grams - 45cm (18in) width
• This brush comes with 4 2mm Pencil jets with holes for 4 extra jets
• Single trim brush
• Soft bristles with split ends for a "micro-fibre like" action on the glass
• Sprung brush stock (made in UK) allowing equal pressure accross full brush width
• Needs to be held OFF the glass for rinsing
• Comes standard with 4 x 2mm pencil jets
• Comes with 6mm jet tubing to connect all jets
• Comes with a 4-way push-fit fitting that receives standard 8mm pole tube
• Check "We Also Recommend" items below, for Push Fit Valve Fitting and other fan and pencil jet options

$10.00