6mm/8mm Push Fit TEE
6 - 8 - 6 mm
$2.8
RRP $3.00
SAVE $0.20 (7%)
In Stock
EX GST
6mm/8mm Push Fit TEE
- 8mm OD input - 2x 6mm OD outputs
- Designed for Gardiner brushes with lightweight 6mm Jet Tube
(WF6-8-6TEE)
Be The First To Review This Product!
Help other Window Cleaning World users shop smarter by writing reviews for products you have purchased.
Others Also Bought
12.5L Short DI Lift & Carry System Kit
12.5L Kit
SKU: WPDI12.5SHORTCOMPKIT
Brand: WCW
Add Resin and a TDS Meter Here
Gardiner X3 Xtreme Section #1
- Replacement section #1 for Gardiner X3 Xtreme poles
- Includes joint taps, clamp and smart clamp level
$295.00
Carbon Filter
10in x 2.5in
SKU: WPCF10
Replacement Cartridge Fits DI Tanks
$12.00
4% OFF
RRP $12.50
More From This Category
Gardiner 50 deg Fan Jets (x2)
45 Degrees
SKU: GDFJWR
Brand: Gardiner Pole Systems
Increase your Rinse Flow!
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 16 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Standard brushes will require 19mm screws, Xtreme Brushes MUST use 16mm screws, 19mm is too long and can potentially scratch glass
- Please note: The rinse bar does not come with the brush & gooseneck pictured
$10.00
Gardiner Brush Bumper 35cm (SL, Ultimate, Xtreme)
Protect your Brush, Protect the Frames!
$15.00 EX GST
Gardiner Brush Bumper 35cm (SL, Ultimate, Xtreme)
Protect your Brush, Protect the Frames!
SKU: GDSLBB35
Brand: Gardiner Pole Systems
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 16 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Standard brushes will require 19mm screws, Xtreme Brushes MUST use 16mm screws, 19mm is too long and can potentially scratch glass
- Please note: The rinse bar does not come with the brush & gooseneck pictured
$15.00
Attaches to Gardiner Brushes
Gardiner QuickLoQ Swivel Brush Socket Adapter
Swivel Brush Socket
$15.00 EX GST
Gardiner QuickLoQ Swivel Brush Socket Adapter
Swivel Brush Socket
SKU: GDSBSA
Brand: Gardiner Pole Systems
Attaches to Gardiner Brushes
$15.00