Claber Tap Adapter 3/4" to 1"
(CLTA34-1)
Be The First To Review This Product!
Help other Window Cleaning World users shop smarter by writing reviews for products you have purchased.
Others Also Bought
Dual Inline TDS Meter
Install onto Your DI System
SKU: WPTDSDUAL
Brand: WCW
Constant TDS Readings
Verdi High-Flow 10mm Pole Tube 50m Coil
- Premium, hard-wearing PU Pole Tube
- Recommended for water-fed tools that need A LOT OF FLOW, i.e. Reach-iT brushes with large rinse bars.
- Super Flexible and springy
- 10mm OD - 6.5mm ID
- Fully compatible with 8mm Push Fit Fittings
- Handles all weather conditions and temperatures up to 70 °C
- Springy and flexible
- Not compatible with Univalve
- While this pole tube is very robust and can be used as a delivery hose, pole tubing is typically NOT designed to be used as a hose that lays on the ground - only use enough to get from the ground to the top of the fully extended pole
- Use a proper reinforced hose for water delivery to the area where you are working. Preferably a 6mm - 12mm ID hose that can withstand cars driving over it and being dragged past rose bushes etc...
- Not suitable for use on a hose reel (if left coiled on your hose reel under pressure it may damage your hose reel - Boa Constrictor effect!). A hose reel can be used as storage, just unwind all of the tube before use
$80.00
Gardiner Protecta-Ball
Protect Your Tap!
SKU: WFRB
Brand: WCW
Small or Large!
From $2.50
Choice of 6mm, 8mm or 12mm ID hose
Claber Metal 40 Hose Reel Kits
Choose a Reel only or a Pre-made Kit!
From $115.00 EX GST
Claber Metal 40 Hose Reel Kits
Choose a Reel only or a Pre-made Kit!
SKU: CLHR40KITS
Brand: Claber
Choice of 6mm, 8mm or 12mm ID hose
EDCO Blue Pad Holder with Universal Joint
- Fits all standard poles
- Velcro style hooks underneath to hold scrubbing pad
- Sold without pads
From $115.00
Red Clip Push-Fit T Connector for Quik-LoQ
Locking C-clip for 8mm push fits
SKU: GDPFRedClip
Brand: Gardiner Pole Systems
$0.20
12mm Swivel Tap Adaptor
No More Annoying Hose Twist
SKU: WFSTA12mm
Brand: Pope
Move Your Hose Around Freely
6 Litre DI System - Black
- Simple DI Pure Water System without pre-filter
- Filled with 6 litres of resin, Ready To Go
- 52cm high, 19cm in diameter
$12.50
Black Diamond Flat Top (Sorbo) Soft Rubber 18in (45cm)
Fits Sorbo Channels
SKU: BDRF18S_Kit
Brand: Black Diamond
$3.95
X-ION OneShot Remote Control
On/Off Remote for your Pump Controller
SKU: SPOSSA
$150.00
X-ION TT1
New Portable Water-Fed Unit
SKU: XionTrolley_Kits
Brand: WCW
BYO Pure water and clean anywhere!
Quick Connect Fitting for 8mm ID Minibore Hose
- Fits Hose with an inner diameter of 8mm
- Fits Gardiner Minibore 8mm ID Hose
- Will Not Fit Pole Tube
From $1,180.00
More From This Category
Pro 26 Male Plug 6mm Barb
Professional Grade hose fitting
SKU: GDP26MP6mm
Brand: Gardiner Pole Systems
EZ-Snap Male 6mm Barb
- Use with 6mm or 8mm EZ-Snap Female connection to connect pole tube to pole hose
- Fits 6mm ID tube
- Use a protecta ball to protect the bits from getting damaged and allow the male to female connection to have a longer life
- Straight from Gardiner Pole Systems. Connect your tube clean.
- Use with an O-clip or O-clamp to connect properly.
$3.00
Claber 3/4" Tap Adapter
20mm Screw on Thread
SKU: CLTA34
Brand: Claber
Installs onto DI Tank Inlet/Outlet
Pro 26 Male Plug 8mm Barb
- Suitable for 8mm ID delivery hose
- Please note that all barbed fittings will need securing to the hose with either a hose clamp or an O clip.
- 6 Month manufacturing defect warranty
$4.00
Claber 3/4in Sprinkler Connect
SKU: CLSC
Brand: Claber
Pro 26 Male Plug 8mm Barb
- Suitable for 8mm ID delivery hose
- Please note that all barbed fittings will need securing to the hose with either a hose clamp or an O clip.
- 6 Month manufacturing defect warranty
$2.00