Gardiner Pole Cap (Fits Section 7)

SKU: GDEC7

Brand: Gardiner Pole Systems

SLX Extension #7

• Can be added to the SL-X Extension #6 
• Comes with end cap
• Adds 4.5ft (138cm)
• 390g

$6.50

Gardiner Pole Cap (Fits Section 7)

SKU: GDEC7

Brand: Gardiner Pole Systems

SLX Extension #7

• Can be added to the SL-X Extension #6 
• Comes with end cap
• Adds 4.5ft (138cm)
• 390g

$6.50

Gardiner Super-Lite Brush Dual-Trim Medium Mixed

10" (25cm)

SKU: GDBSLDTM

Brand: Gardiner Pole Systems

Ready to Plug Into Your Hose

Gardiner Quick-LoQ Goosneck Valve

• All New Design -  Version 2 - redesigned by Gardiner
• Gardiner Gooseneck Valve with Patented Inner Valve Technology
• "Control is not letting go" - Maintain full 'two-hand' control of the pole whilst controlling the water flow
• Simple and fast twist to actuate action - Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
• Twist on at the top LH corner of the window and Twist off on the bottom RH corner
• Adjustable Tension Control to allow for different brush sizes and pole heights
• Maximum recommended pole height - 50ft
• Can be operated with your hand for use on ground floor windows
• Improves speed of water control compared to a manual valve

• Fitting Instructions

• Remove old gooseneck from the pole
• Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
• Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp - ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
• Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
• Before first use ensure that all of the pole clamps are correctly tightened - it is important that the pole clamps firmly clamp the pole sections when using this valve
• adjust the gooseneck valve adjuster so that it operate with the desired force needed - TIP, when working at height this will need to be loosened off compared to ground and first floor work

• How to Operate

• Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
• When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
• Move to the next window and repeat

• Troubleshooting

• Water is not flowing through the device - ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• Water is not shutting off using the device - ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear - remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• The unit is too stiff to operate - loosen the bolt cap adjuster until desired tension is reached
• The unit is too loose and turns off too easily - tight the bolt cap adjuster until the desired tension is reached

$64.50

Gardiner Xtreme Hi-Strength #10 Extension

No. 10 Section

SKU: GDXTRHSEXT10

Brand: Gardiner Pole Systems

Adds 6 Foot

SLX Extension #7

• Can be added to the SL-X Extension #6 
• Comes with end cap
• Adds 4.5ft (138cm)
• 390g

$415.00

Gardiner Ultimate Medium Mixed 25cm Brush

10" (25cm)

SKU: GDBULTMO

Brand: Gardiner Pole Systems

Gardiner SuperLite DualTrim 100% DuPont Nylon

• 100% dupont nylon, dual-trim brush allows for an incredible contact with the glass that covers a large surface area and provides an ultimate scrubbing power at a SuperLite weight
• Gardiner brush with brand new jet capsules that are easily changed by hand or even easier with a widget
• Jet capsules are a push-fit fitting that allow for easier attach and detach when using a rinse bar
• Dupont Nylon with dual-trim bristle orientation allows for the brush to cover a larger surface area
• Inner and outer bristles are both 100% Dupont Nylon allow better scrubbing power with a reduced weight
• 10" (25cm)
• Comes standard with 2 x Jet Capsules
• Comes with 6mm jet tubing to connect all jets
• Comes with a 2-way push-fit fitting that receives standard 8mm pole tube
• Check "We Also Recommend" items below to add a rinse bar and gooseneck valve to get the best window cleaning brush set-up

$58.50

Gardiner SL-X27

27ft 100% Carbon Pole

SKU: GDSLX27_KIT

Brand: Gardiner Pole Systems

The Viper 45 is our 3X4 Adjustable Wide-Body squeegee with the ends cut at a 45° angle. The Viper 45 still has the high quality that Sörbo is known for and the popular easy-on, easy-off Sörbo end clips, which give you easy access when changing the rubber blade.

The new 45 degree diagonally angled ends on the front and back of the channel helps prevent the alloy's tip from coming into contact with the frame surrounding the window. It cleans closer to the frame, leaving less water, and reaches into the corners. It is perfectly suited for the S-technique.

Features

• 45 degree angled ends clean closer to the frame and leave less water for detailing.
• The 3X4 Viper 45 Channel has the same high durability you would expect from any Sorbo tool.
• This channel is excellent when using the S Technique for cleaning closer to the frame and into the corners.

$595.00

Gardiner Xtreme Medium Hybrid

10" (25cm)

SKU: GDBXTRMH

Brand: Gardiner Pole Systems

Ready to Plug Into Your Hose

SLX Extension #7

• Can be added to the SL-X Extension #6 
• Comes with end cap
• Adds 4.5ft (138cm)
• 390g

$67.50

X3 Xtreme 44ft Extension pack

Makes a 35 Foot Extreme into a 44 foot

SKU: GDXTREXT44-X3

Brand: Gardiner Pole Systems

Extra 3.05 Extended Length

SLX Extension #7

• Can be added to the SL-X Extension #6 
• Comes with end cap
• Adds 4.5ft (138cm)
• 390g

$760.00

Gardiner Super-Max 27

100% HiMod 3K Carbon Pole

SKU: GDSMAX27-3K_KIT

Brand: Gardiner Pole Systems

$950.00

Gardiner SuperMax S2 #8-#9 Extension Pack

SKU: GDSMS2EXT89

Brand: Gardiner Pole Systems

$490.00

Gardiner CL-X Section #1

Fits Gardiner CL-X Poles Only

SKU: GDCLXEXT1

Brand: Gardiner Pole Systems

CLX Replacement Section

$70.00

Gardiner SuperMax S2 #8-#9 Extension Pack

SKU: GDSMS2EXT89

Brand: Gardiner Pole Systems

$490.00

Standard Modular Extension #10

No. 10 Section

SKU: GDSMEXT10

Brand: Gardiner Pole Systems

Adds 5.25 Foot

SLX Extension #7

• Can be added to the SL-X Extension #6 
• Comes with end cap
• Adds 4.5ft (138cm)
• 390g

$200.00