6mm Jet Tube Short (12cm) x2
6mm Jet Tube
- Insert into 6mm push fit fitting
- Available in 12cm and 22cm lengths
- Sold in pairs
(GDJT)
Be The First To Review This Product!
Help other Window Cleaning World users shop smarter by writing reviews for products you have purchased.
Others Also Bought
Unger Ergotec Padded Belt
Ninja
SKU: UGERGBELT
Brand: Unger
4 Clips for Special Attachment
$39.90
Quick-Loq Brush to Pole Insert!
Gardiner Quick-LoQ Brush Pole Tip
Pole Insert to Brush Quick-LoQ
$15.00 EX GST
Gardiner Quick-LoQ Brush Pole Tip
Pole Insert to Brush Quick-LoQ
SKU: GDQLRN1
Brand: Gardiner Pole Systems
Quick-Loq Brush to Pole Insert!
Verdi GTS Pole Tube 50m Coil
- Premiumhard wearing PU Pole Tube
- 8mm OD - 5mm ID
- Fully compatible with 8mm Push Fit Fittings
- Handles all weather conditions and temperatures up to 70 °C
- Springy and flexible
- Compatible with UniValve
- Whilst this pole tube is very robust and can be used as a delivery hose, pole tubing is typically NOT designed to be used as a hose that lays on the ground - only use enough to get from the ground to the top of the fully extended pole
- Use proper reinforced hose for water delivery to the area where you are working. Preferably 6mm - 12mm ID hose that can withstand cars driving over it and being dragged past rose bushes etc...
- Not suitable for use on a hose reel (if left coiled on your hose reel under pressure it may damger your hose reel - Boa Constrictor effect!). A hose reel can be used as storage, just unwind all of the tube before use
$15.00
Gardiner Smart Clamp Body
#1 - #10
SKU: GDSC
Brand: Gardiner Pole Systems
Replacement Part for Gardiner Poles
6mm Jet Tube
- Insert into 6mm push fit fitting
- Available in 12cm and 22cm lengths
- Sold in pairs
From $15.00
Unger Ninja MicroWipe
40x40cm & 55x55cm
SKU: UGMFCNINJA
Brand: Unger
Choose Your Size!
6mm Jet Tube
- Insert into 6mm push fit fitting
- Available in 12cm and 22cm lengths
- Sold in pairs
From $8.50
Wagtail Wave
12inch and 18inch
SKU: WAGWAVE
Brand: Wagtail Cleaning Tools
Includes Microfibre and Scrub Pads
Gardiner Xtreme 25 - X3
- Exclusive to Window Cleaning World
- Extremely light, compact and rigid
- Faster - Stronger - Lighter - The new X3 Xtreme
- Comes Complete with FREE Quick-LoQ Gooseneck
- The Perfect Balance of Lightweight, Rigidity & Strength
- Ultimate Lightness & Rigidity - 15% more rigid and 20% stronger than previous Xtreme poles
- Fully Telescopic Extending Sections
- 4 Section High Modulus (63.3MSI) Carbon Fibre Telescopic Pole
- Gardiner Smart Clamps - non catching - non finger pinching
- Base Handle Section has outer insulated layer for safety
- Collapsed length 1.7m
- Weight 1100g
- PRODUCT INCLUDES POLE ONLY. Add on an extra pole tip, pole hose kit or brush to complete your waterfed pole kit!
From $56.50
Track Brush with Contour Handle
Silver Handle
SKU: WCWTBwH
Brand: WCW
Stiff Bristles
6mm Jet Tube
- Insert into 6mm push fit fitting
- Available in 12cm and 22cm lengths
- Sold in pairs
$6.80
Gardiner 100 deg Fan Jets (x2)
100 Degrees
SKU: GDFJ100
Brand: Gardiner Pole Systems
Increase your Rinse Flow!
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 32 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Please note: The rinse bar does not come with the brush & gooseneck pictured
$10.00
Assemble pole & components here
Gardiner SLX-35, 35ft 100% Carbon Pole
3 storey pole (35ft - 10.7m)
$850.00 EX GST
Gardiner SLX-35, 35ft 100% Carbon Pole
3 storey pole (35ft - 10.7m)
SKU: GDSLX35_KIT
Brand: Gardiner Pole Systems
Assemble pole & components here
6mm Jet Tube
- Insert into 6mm push fit fitting
- Available in 12cm and 22cm lengths
- Sold in pairs
$850.00
More From This Category
6mm/8mm Push Fit Y-fitting
6 - 6 - 8
SKU: WF6-8-6Y
Brand: WCW
2 x 6mm - 1 x 8mm
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 32 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Please note: The rinse bar does not come with the brush & gooseneck pictured
$2.50
Gardiner QuicK-LoQ 90deg Brush Socket
Brush Socket
SKU: GDQLBS
Brand: Gardiner Pole Systems
Fits Gardiner Brushes
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 32 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Please note: The rinse bar does not come with the brush & gooseneck pictured
$6.50
Gardiner 100 deg Fan Jets (x2)
100 Degrees
SKU: GDFJ100
Brand: Gardiner Pole Systems
Increase your Rinse Flow!
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 32 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Please note: The rinse bar does not come with the brush & gooseneck pictured
$10.00