Gardiner MicroJet Rinse Bar 35cm (14in)

• 22 micro jets provide precise but gentle rinsing with brush on the glass
• Fits between brush and brush socket on any 35cm Gardiner brush
• Provides over-bristle micro jet rinsing
• Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
• Height of jets can be adjusted
• Can be used with internal brush jets as well
• Lightweight at 58g
• Uses standard Brush T Connector and jet hose - optional extra
• Needs 2 longer screws to allow it to be attached between brush body and brush socket
• Standard brushes will require 19mm screws, Xtreme Brushes MUST use 16mm screws, 19mm is too long and can potentially scratch glass
• Please note: The rinse bar does not come with the brush & gooseneck picture