Gardiner QuickLoQ Swivel Brush Socket Adapter
Swivel Brush Socket
$15.00
In Stock
EX GST
Swivel Brush Socket Adapter
- Converts any Quick-LoQ gooseneck to a swivel action gooseneck with close-pivot
- Connects to any Gardiner brush in place of standard brush socket
- Screws not supplied to fix to the brush
(GDSBSA)
Be The First To Review This Product!
Help other Window Cleaning World users shop smarter by writing reviews for products you have purchased.
We Also Recommend
Claber Double Tap Adaptor
Run 2 Systems From 1 Tap
SKU: CLDTA
Brand: Claber
Control Flow With 2 Valves
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 16 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Standard brushes will require 19mm screws, Xtreme Brushes MUST use 16mm screws, 19mm is too long and can potentially scratch glass
- Please note: The rinse bar does not come with the brush & gooseneck pictured
$10.00
You May Also Like
Claber Double Tap Adaptor
Run 2 Systems From 1 Tap
SKU: CLDTA
Brand: Claber
Control Flow With 2 Valves
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 16 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Standard brushes will require 19mm screws, Xtreme Brushes MUST use 16mm screws, 19mm is too long and can potentially scratch glass
- Please note: The rinse bar does not come with the brush & gooseneck pictured
$10.00
Others Also Bought
Ettore Swivel Super System Brush
Super System
SKU: ETSSB
Brand: Ettore
Adjusts to Any Angle
$55.00
4% OFF
RRP $57.50
Gardiner QuicK-LoQ 90deg Brush Socket
Brush Socket
SKU: GDQLBS
Brand: Gardiner Pole Systems
Fits Gardiner Brushes
Swivel Brush Socket Adapter
- Converts any Quick-LoQ gooseneck to a swivel action gooseneck with close-pivot
- Connects to any Gardiner brush in place of standard brush socket
- Screws not supplied to fix to the brush
$6.50
13% OFF
RRP $7.50
Choose Your Hose!
Claber Metal 40 Complete Package
Choice of 6mm, 8mm or 12mm ID hose
From $99.50 EX GST
Claber Metal 40 Complete Package
Choice of 6mm, 8mm or 12mm ID hose
SKU: CLHR40KITS
Brand: Claber
Choose Your Hose!
QuickLoQ Swivel Adapter
- Convert your Quick-LoQ pole tip to a Quick-LoQ Swivel pole tip
From $99.50
Quick-LoQ Swivel Adaptor
Gardiner QuickLoQ Swivel Adapter
Instantly convert fixed angle adaptor to swivelling
$15.00 EX GST
Gardiner QuickLoQ Swivel Adapter
Instantly convert fixed angle adaptor to swivelling
SKU: GDQLSA
Brand: Gardiner Pole Systems
Quick-LoQ Swivel Adaptor
Swivel Tap Adaptor
- Swivels side to side and across. 180 degree swivel action
- Eliminates hose twist when kept on the outside of a hose reel
- Move your hose around freely without getting twists and kinks
- Removable tap adaptor
- Suitable to 12mm fittings
- The swivel tap adaptor suits 1" and 3/4" taps
$15.00
Gardiner Super-Max 27
100% HiMod 3K Carbon Pole
SKU: GDSMAX27-3K_KIT
Brand: Gardiner Pole Systems
The *NEW* Gardiner 65% Carbon CLX-27 Waterfed Pole
- Exclusive to Window Cleaning World
- 6 section telescopic hybrid carbon pole
- 27ft actual length (8.1m)
- Weight 1720 grams
- Includes the all new Gardiner Smart Clamps
- Can be extended to 31ft with #7 section (available separately)
- Will easily do a 2 storey commercial building
- PRODUCT INCLUDES POLE ONLY. Add on an extra pole tip, pole hose kit or brush to complete your waterfed pole kit!
$950.00
Gardiner MicroJet Rinse Bar 14in
Suits 14in (35cm) Brushes
SKU: GDMJRB35
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 16 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Standard brushes will require 19mm screws, Xtreme Brushes MUST use 16mm screws, 19mm is too long and can potentially scratch glass
- Please note: The rinse bar does not come with the brush & gooseneck pictured
$56.50
Push Fit Elbow 6mm
Low Profile Brush Modification
SKU: GDPFELB6mm
$3.80
25M Pole Hose Kit
Choose your Attachments
SKU: WFPHK25
15M Pole Hose Kit
All pole hose kits come standard with 15m of pole tube, a valve, an Anti Snag Pole Hose Connector, O-clip to hold in place, and a protecta ball to protect the fittings, as well as preventing snags.
Variations
- 15M pole hose kit
- 15M pole hose kit with a Quick-LoQ Brush Pole Tip. Normal pole tip to connect a Gardiner brush to a Gardiner pole.
- 15M pole hose kit with a Long Quick-LoQ Brush Pole Tip. Long pole tip to reach deep sill windows.
- 15M pole hose kit with a Quick-LoQ Valve Pole Tip. The pole tip is clamped into
- 15M pole hose kit with Double Pole Tip. This includes a Quick-LoQ brush pole tip and a double adapter to connect a pad holder.
From $49.50
More From This Category
Xtreme Sill Brush Bumper (pair)
Includes 2
SKU: GDBXBBSill
Brand: Gardiner Pole Systems
Only for Xtreme SILL Brushes
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 16 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Standard brushes will require 19mm screws, Xtreme Brushes MUST use 16mm screws, 19mm is too long and can potentially scratch glass
- Please note: The rinse bar does not come with the brush & gooseneck pictured
$5.00
Gardiner Large Overhead Spray Kit
Large
SKU: GDOSKL
Brand: Gardiner Pole Systems
Internal Cleaning Kit!
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 16 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Standard brushes will require 19mm screws, Xtreme Brushes MUST use 16mm screws, 19mm is too long and can potentially scratch glass
- Please note: The rinse bar does not come with the brush & gooseneck pictured
$30.00
6mm/8mm Push Fit Y-fitting
6 - 8 - 6 mm
SKU: WF6-8-6Y
Brand: WCW
2 x 6mm - 1 x 8mm
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 16 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Standard brushes will require 19mm screws, Xtreme Brushes MUST use 16mm screws, 19mm is too long and can potentially scratch glass
- Please note: The rinse bar does not come with the brush & gooseneck pictured
$2.50