Gardiner Angle Adapter Type 2
Euro Pole Thread to Euro Brush
Gardiner Quick-LoQ Resi-Neck Type 2 - Srew on
- Screw on to your existing Euro Thread pole tip
- Screws into Euro threaded brush socket (Vikan brushes etc.)
(GDRN2)
Be The First To Review This Product!
Help other Window Cleaning World users shop smarter by writing reviews for products you have purchased.
We Also Recommend
Claber Double Tap Adaptor
Run 2 Systems From 1 Tap
SKU: CLDTA
Brand: Claber
Control Flow With 2 Valves
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 16 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Standard brushes will require 19mm screws, Xtreme Brushes MUST use 16mm screws, 19mm is too long and can potentially scratch glass
- Please note: The rinse bar does not come with the brush & gooseneck pictured
$12.00
You May Also Like
Claber Double Tap Adaptor
Run 2 Systems From 1 Tap
SKU: CLDTA
Brand: Claber
Control Flow With 2 Valves
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 16 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Standard brushes will require 19mm screws, Xtreme Brushes MUST use 16mm screws, 19mm is too long and can potentially scratch glass
- Please note: The rinse bar does not come with the brush & gooseneck pictured
$12.00
Others Also Bought
Gardiner Angle Adapter Type 1 - Euro Thread
Gardiner Pole Insert to Euro Thread
SKU: GDRN1
Brand: Gardiner Pole Systems
Unger Aluminium Pad Holder with 22mm Euro Thead
- 8in pad holder
- Has Velcro underneath to hold a variety of pads (Unger, Edco, Vikan etc.)
- Universal joint socket fits a Euro threaded tip commonly found on water-fed poles
- Does not include washing pad (illustrative purposes only)
$15.00
More From This Category
Gardiner Quick-LoQ Standard Top Arm
Quick-LoQ Top Arm
SKU: GDQLSTA
Brand: Gardiner Pole Systems
Modify Your Pole Tip!
$7.50
6" Arm
Gardiner Quick-LoQ Angle Adaptor Type 1 LONG ARM
Pole Insert to Quick-LoQ Brush
$18.50 EX GST
Gardiner Quick-LoQ Angle Adaptor Type 1 LONG ARM
Pole Insert to Quick-LoQ Brush
SKU: GDQLRN1L
Brand: Gardiner Pole Systems
6" Arm
Stainless Steel O-Clamps for Pole tubing and small gauge hoses.
- Select 9.5 for normal 8mm OD pole tube
- Select 10.5 for Gardiner reinforced pole tube
- Select 12.5 for 6mm ID Gardiner Microbore Hose
- Select 14.5 for 8mm ID Gardiner Minibore Hose
Use Tower Pincers to clamps them tight
$18.50
Brush Socket Screws onto Brush
Gardiner Angle Adapter with Swivel Brush Socket
Swivel Brush Socket
$25.00 EX GST
Gardiner Angle Adapter with Swivel Brush Socket
Swivel Brush Socket
SKU: GDRNSWLNEW
Brand: Gardiner Pole Systems
Brush Socket Screws onto Brush
$25.00