- Home
- Water-Fed
- Pole Fittings & Goosenecks
- Plastic Goosenecks
- Gardiner Quick-LoQ Extender Angle Adapter
Gardiner Quick-LoQ Extender Angle Adapter
- Brand new Gooseneck System
- Easy push button operation
- Brilliantly versatile extender *MUST HAVE ITEM*
- For example can be used to clean the TOP of a horizontal sun fin - face the brush back down
- Brush will always be square
- Offers ease of use and maximum adaptability
- Very ergonomic operation
(GDQLEAA)
Be The First To Review This Product!
Help other Window Cleaning World users shop smarter by writing reviews for products you have purchased.
We Also Recommend
Claber Double Tap Adaptor
Run 2 Systems From 1 Tap
SKU: CLDTA
Brand: Claber
Control Flow With 2 Valves
Gardiner Quick-LoQ Goosneck Valve
- All New Design - Version 2 - redesigned by Gardiner
- Gardiner Gooseneck Valve with Patented Inner Valve Technology
- "Control is not letting go" - Maintain full 'two-hand' control of the pole whilst controlling the water flow
- Simple and fast twist to actuate action - Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
- Twist on at the top LH corner of the window and Twist off on the bottom RH corner
- Adjustable Tension Control to allow for different brush sizes and pole heights
- Maximum recommended pole height - 50ft
- Can be operated with your hand for use on ground floor windows
- Improves speed of water control compared to a manual valve
-
Fitting Instructions
- Remove old gooseneck from the pole
- Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
- Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp - ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
- Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
- Before first use ensure that all of the pole clamps are correctly tightened - it is important that the pole clamps firmly clamp the pole sections when using this valve
- adjust the gooseneck valve adjuster so that it operate with the desired force needed - TIP, when working at height this will need to be loosened off compared to ground and first floor work
-
How to Operate
- Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
- When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
- Move to the next window and repeat
-
Troubleshooting
- Water is not flowing through the device - ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- Water is not shutting off using the device - ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear - remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- The unit is too stiff to operate - loosen the bolt cap adjuster until desired tension is reached
- The unit is too loose and turns off too easily - tight the bolt cap adjuster until the desired tension is reached
$12.00
You May Also Like
Claber Double Tap Adaptor
Run 2 Systems From 1 Tap
SKU: CLDTA
Brand: Claber
Control Flow With 2 Valves
Gardiner Quick-LoQ Goosneck Valve
- All New Design - Version 2 - redesigned by Gardiner
- Gardiner Gooseneck Valve with Patented Inner Valve Technology
- "Control is not letting go" - Maintain full 'two-hand' control of the pole whilst controlling the water flow
- Simple and fast twist to actuate action - Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
- Twist on at the top LH corner of the window and Twist off on the bottom RH corner
- Adjustable Tension Control to allow for different brush sizes and pole heights
- Maximum recommended pole height - 50ft
- Can be operated with your hand for use on ground floor windows
- Improves speed of water control compared to a manual valve
-
Fitting Instructions
- Remove old gooseneck from the pole
- Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
- Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp - ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
- Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
- Before first use ensure that all of the pole clamps are correctly tightened - it is important that the pole clamps firmly clamp the pole sections when using this valve
- adjust the gooseneck valve adjuster so that it operate with the desired force needed - TIP, when working at height this will need to be loosened off compared to ground and first floor work
-
How to Operate
- Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
- When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
- Move to the next window and repeat
-
Troubleshooting
- Water is not flowing through the device - ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- Water is not shutting off using the device - ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear - remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- The unit is too stiff to operate - loosen the bolt cap adjuster until desired tension is reached
- The unit is too loose and turns off too easily - tight the bolt cap adjuster until the desired tension is reached
$12.00
Others Also Bought
Gardiner Quick-LoQ Brush Pole Tip Type 1
Pole Insert to Brush Quick-LoQ
SKU: GDQLRN1
Brand: Gardiner Pole Systems
Gardiner Quick-LoQ Extender Angle Adapter
- Brand new Gooseneck System
- Easy push button operation
- Brilliantly versatile extender *MUST HAVE ITEM*
- For example can be used to clean the TOP of a horizontal sun fin - face the brush back down
- Brush will always be square
- Offers ease of use and maximum adaptability
- Very ergonomic operation
$15.00
Gardiner Angle Adapter Type 1 - Euro Thread
Gardiner Pole Insert to Euro Thread
SKU: GDRN1
Brand: Gardiner Pole Systems
Gardiner Quick-LoQ Extender Angle Adapter
- Brand new Gooseneck System
- Easy push button operation
- Brilliantly versatile extender *MUST HAVE ITEM*
- For example can be used to clean the TOP of a horizontal sun fin - face the brush back down
- Brush will always be square
- Offers ease of use and maximum adaptability
- Very ergonomic operation
$15.00
Quick-LoQ Angle Adaptor Type 2
Euro pole tip to square QuickLoQ Brush Socket
SKU: GDQLRN2
Brand: Gardiner Pole Systems
Screws into Pole
Gardiner Quick-LoQ Goosneck Valve
- All New Design - Version 2 - redesigned by Gardiner
- Gardiner Gooseneck Valve with Patented Inner Valve Technology
- "Control is not letting go" - Maintain full 'two-hand' control of the pole whilst controlling the water flow
- Simple and fast twist to actuate action - Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
- Twist on at the top LH corner of the window and Twist off on the bottom RH corner
- Adjustable Tension Control to allow for different brush sizes and pole heights
- Maximum recommended pole height - 50ft
- Can be operated with your hand for use on ground floor windows
- Improves speed of water control compared to a manual valve
-
Fitting Instructions
- Remove old gooseneck from the pole
- Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
- Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp - ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
- Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
- Before first use ensure that all of the pole clamps are correctly tightened - it is important that the pole clamps firmly clamp the pole sections when using this valve
- adjust the gooseneck valve adjuster so that it operate with the desired force needed - TIP, when working at height this will need to be loosened off compared to ground and first floor work
-
How to Operate
- Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
- When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
- Move to the next window and repeat
-
Troubleshooting
- Water is not flowing through the device - ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- Water is not shutting off using the device - ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear - remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- The unit is too stiff to operate - loosen the bolt cap adjuster until desired tension is reached
- The unit is too loose and turns off too easily - tight the bolt cap adjuster until the desired tension is reached
$15.00
8mm Push-Fit to Hose connector
8mm Pole Tube to Garden Hose
SKU: WFPFPHC8mm
Brand: WCW
Gardiner Quick-LoQ Extender Angle Adapter
- Brand new Gooseneck System
- Easy push button operation
- Brilliantly versatile extender *MUST HAVE ITEM*
- For example can be used to clean the TOP of a horizontal sun fin - face the brush back down
- Brush will always be square
- Offers ease of use and maximum adaptability
- Very ergonomic operation
$12.00
Twin 8L DI Pure Water Trolley System
With Triple TDS meter
SKU: WPDITWIN8LTR_KIT
Brand: WCW
Gardiner Quick-LoQ Extender Angle Adapter
- Brand new Gooseneck System
- Easy push button operation
- Brilliantly versatile extender *MUST HAVE ITEM*
- For example can be used to clean the TOP of a horizontal sun fin - face the brush back down
- Brush will always be square
- Offers ease of use and maximum adaptability
- Very ergonomic operation
$745.00
More From This Category
Quick-LoQ Angle Adaptor Type 2
Euro pole tip to square QuickLoQ Brush Socket
SKU: GDQLRN2
Brand: Gardiner Pole Systems
Screws into Pole
Gardiner Quick-LoQ Goosneck Valve
- All New Design - Version 2 - redesigned by Gardiner
- Gardiner Gooseneck Valve with Patented Inner Valve Technology
- "Control is not letting go" - Maintain full 'two-hand' control of the pole whilst controlling the water flow
- Simple and fast twist to actuate action - Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
- Twist on at the top LH corner of the window and Twist off on the bottom RH corner
- Adjustable Tension Control to allow for different brush sizes and pole heights
- Maximum recommended pole height - 50ft
- Can be operated with your hand for use on ground floor windows
- Improves speed of water control compared to a manual valve
-
Fitting Instructions
- Remove old gooseneck from the pole
- Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
- Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp - ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
- Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
- Before first use ensure that all of the pole clamps are correctly tightened - it is important that the pole clamps firmly clamp the pole sections when using this valve
- adjust the gooseneck valve adjuster so that it operate with the desired force needed - TIP, when working at height this will need to be loosened off compared to ground and first floor work
-
How to Operate
- Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
- When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
- Move to the next window and repeat
-
Troubleshooting
- Water is not flowing through the device - ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- Water is not shutting off using the device - ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear - remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- The unit is too stiff to operate - loosen the bolt cap adjuster until desired tension is reached
- The unit is too loose and turns off too easily - tight the bolt cap adjuster until the desired tension is reached
$15.00
Gardiner Angle Adapter with Swivel Brush Socket Long
Swivel Brush Socket
SKU: GDRNSWLNEWL
Brand: Gardiner Pole Systems
Long Neck
Gardiner Quick-LoQ Goosneck Valve
- All New Design - Version 2 - redesigned by Gardiner
- Gardiner Gooseneck Valve with Patented Inner Valve Technology
- "Control is not letting go" - Maintain full 'two-hand' control of the pole whilst controlling the water flow
- Simple and fast twist to actuate action - Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
- Twist on at the top LH corner of the window and Twist off on the bottom RH corner
- Adjustable Tension Control to allow for different brush sizes and pole heights
- Maximum recommended pole height - 50ft
- Can be operated with your hand for use on ground floor windows
- Improves speed of water control compared to a manual valve
-
Fitting Instructions
- Remove old gooseneck from the pole
- Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
- Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp - ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
- Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
- Before first use ensure that all of the pole clamps are correctly tightened - it is important that the pole clamps firmly clamp the pole sections when using this valve
- adjust the gooseneck valve adjuster so that it operate with the desired force needed - TIP, when working at height this will need to be loosened off compared to ground and first floor work
-
How to Operate
- Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
- When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
- Move to the next window and repeat
-
Troubleshooting
- Water is not flowing through the device - ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- Water is not shutting off using the device - ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear - remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- The unit is too stiff to operate - loosen the bolt cap adjuster until desired tension is reached
- The unit is too loose and turns off too easily - tight the bolt cap adjuster until the desired tension is reached
$27.50
Gardiner Angle Adapter Type 2
Euro Pole Thread to Euro Brush
SKU: GDRN2
Brand: Gardiner Pole Systems
Euro to Euro
Gardiner Quick-LoQ Goosneck Valve
- All New Design - Version 2 - redesigned by Gardiner
- Gardiner Gooseneck Valve with Patented Inner Valve Technology
- "Control is not letting go" - Maintain full 'two-hand' control of the pole whilst controlling the water flow
- Simple and fast twist to actuate action - Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
- Twist on at the top LH corner of the window and Twist off on the bottom RH corner
- Adjustable Tension Control to allow for different brush sizes and pole heights
- Maximum recommended pole height - 50ft
- Can be operated with your hand for use on ground floor windows
- Improves speed of water control compared to a manual valve
-
Fitting Instructions
- Remove old gooseneck from the pole
- Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
- Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp - ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
- Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
- Before first use ensure that all of the pole clamps are correctly tightened - it is important that the pole clamps firmly clamp the pole sections when using this valve
- adjust the gooseneck valve adjuster so that it operate with the desired force needed - TIP, when working at height this will need to be loosened off compared to ground and first floor work
-
How to Operate
- Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
- When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
- Move to the next window and repeat
-
Troubleshooting
- Water is not flowing through the device - ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- Water is not shutting off using the device - ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear - remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
- The unit is too stiff to operate - loosen the bolt cap adjuster until desired tension is reached
- The unit is too loose and turns off too easily - tight the bolt cap adjuster until the desired tension is reached
$15.00