Gardiner Micro Jet Rinse Bar - Standard width 26cm
Standard Flow 26cm
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 32 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Please note: The rinse bar does not come with the brush & gooseneck pictured
(GDMJRB26)
Be The First To Review This Product!
Help other Window Cleaning World users shop smarter by writing reviews for products you have purchased.
We Also Recommend
Claber Double Tap Adaptor
Run 2 Systems From 1 Tap
SKU: CLDTA
Brand: Claber
Control Flow With 2 Valves
Gardiner Long-Neck Euro Thread Top Arm
- 6 inch (15cm) long arm
- Add to your existing Angle Adapter
$8.50
You May Also Like
Claber Double Tap Adaptor
Run 2 Systems From 1 Tap
SKU: CLDTA
Brand: Claber
Control Flow With 2 Valves
Gardiner Long-Neck Euro Thread Top Arm
- 6 inch (15cm) long arm
- Add to your existing Angle Adapter
$8.50
Wagtail Blue Pole Tube 100m Coil
5MM - 100M
SKU: WAGPT100m
Brand: Wagtail Cleaning Tools
Wagtail Pole Tube
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 32 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Please note: The rinse bar does not come with the brush & gooseneck pictured
$130.00
Others Also Bought
Wagtail Window Washer (T-Bar & Pad)
8"
SKU: WAGTBAR
Brand: Wagtail Cleaning Tools
Lightweight and Easy to Use
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 32 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Please note: The rinse bar does not come with the brush & gooseneck pictured
From $24.00
Connect Hose Straight to a Tap!
Anti Snag Pole Hose Connector
Hose Tail Fits 5-6mm Pole Hose
$11.90 EX GST
Anti Snag Pole Hose Connector
Hose Tail Fits 5-6mm Pole Hose
SKU: WFASPHC
Brand: WCW
Connect Hose Straight to a Tap!
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 32 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Please note: The rinse bar does not come with the brush & gooseneck pictured
$11.90
16L Water Backpack Electric
Holds 16L
SKU: RY16LBP
Brand: WCW
Lasts for Approximately 15 Minutes
CLX Extension #7
- Adds 4ft (122cm)
- 380g
- Turns CLX-27into a CLX-31
$150.00
8mm Push Fit Valve
8mm
SKU: WF8mmVALVE
Brand: WCW
Control Your Flow!
Gardiner Super-Lite Xtreme Medium Mixed
- Ultimate weight saving with good scrubbing power
- Only 150 grams(!) including jet tube and push fitting
- This brush comes with 2 x 2mm pencil jets included
- Extra holes allow 2 more jets to be fitted
- Of course you can easily swap out the existing 2mm jets
- Ideal for use with deep reach goosenecks
- Can be left on glass for rinsing
- Stiffer, shorter bristles in the middle
- Superior mono-filament, dual trim micro-variation bristles made in Germany
- Comes standard with 2 x 2mm pencil jets
- Comes with 6mm jet tubing to connect all jets
- Comes with a 2-way push-fit fitting that receives standard 8mm pole tube
- Check "We Also Recommend" items below, for Push Fit Valve Fitting and other fan and pencil jet options
$7.50
Gardiner Alloy Euro Thread Tip
Euro Screw Thread
SKU: GDEUROTIP
Brand: Gardiner Pole Systems
Convert Your Pole!
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 32 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Please note: The rinse bar does not come with the brush & gooseneck pictured
$12.50
Gardiner Pole Cap
Sizes #2 to #10
SKU: GDEC
Brand: Gardiner Pole Systems
Protect Your Pole!
Gardiner Long-Neck Euro Thread Top Arm
- 6 inch (15cm) long arm
- Add to your existing Angle Adapter
From $3.50
6mm Jet Tube
12cm or 22cm
SKU: GDJT
Brand: Gardiner Pole Systems
Spare Tube for Gardiner Brushes
Gardiner Fan Jets (sold in pairs)
- Designed to be used with Gardiner brushes and 6mm jet tube
- Also comes in narrow fan spray pattern
- Price is for 2 jets
From $1.00
Gardiner Fan Jets
45 Degrees
SKU: GDFJWR
Brand: Gardiner Pole Systems
Increase your Rinse Flow!
Gardiner Super-Lite Xtreme Medium Mixed
- Ultimate weight saving with good scrubbing power
- Only 150 grams(!) including jet tube and push fitting
- This brush comes with 2 x 2mm pencil jets included
- Extra holes allow 2 more jets to be fitted
- Of course you can easily swap out the existing 2mm jets
- Ideal for use with deep reach goosenecks
- Can be left on glass for rinsing
- Stiffer, shorter bristles in the middle
- Superior mono-filament, dual trim micro-variation bristles made in Germany
- Comes standard with 2 x 2mm pencil jets
- Comes with 6mm jet tubing to connect all jets
- Comes with a 2-way push-fit fitting that receives standard 8mm pole tube
- Check "We Also Recommend" items below, for Push Fit Valve Fitting and other fan and pencil jet options
$10.00
More From This Category
Gardiner MicroJet Rinse Bar 35cm (14in)
Standard Flow
SKU: GDMJRB35
Gardiner Fan Jets (sold in pairs)
- Designed to be used with Gardiner brushes and 6mm jet tube
- Also comes in narrow fan spray pattern
- Price is for 2 jets
$56.50
Gardiner Pencil Jets
1.4mm, 2mm or 3mm
SKU: GDBPJ
Brand: Gardiner Pole Systems
Set of 2
From $9.00
Gardiner MicroJet Rinse Bar 26cm - Low Pressure
Low Pressure / Lower flow
SKU: GDMJRB26LP
Brand: Gardiner Pole Systems
Gardiner Fan Jets (sold in pairs)
- Designed to be used with Gardiner brushes and 6mm jet tube
- Also comes in narrow fan spray pattern
- Price is for 2 jets
$49.50