10mm Push Fit Valve
10mm Push Fit Valve
- Suits the Verdi High-Flow 10mm pole tube, and possibly other 10mm(outer diameter) tubes.
- Simple connection, push the tube in to connect and push down the collar to release and remove the tube.
Note: This is a directional valve. The diagram on the valve indicates the flow direction.
(WF10mmVALVE)
Be The First To Review This Product!
Help other Window Cleaning World users shop smarter by writing reviews for products you have purchased.
Others Also Bought
Ettore Rubber 18" (45cm)
18" (45cm)
SKU: ETR18
Brand: Ettore
Guaranteed Streak-Free Results
Bring It On Hard Water Spot Cleaner
Bring It On Cleaner is a hard water stain remover and is perfect for removing:
- Water and Mineral deposits on glass
- Organic Stains
- Rust build up
- Grease
- Oil
- Soap Scum
$6.45
Gardiner CL-X8
The Pros Choice of Trad Pole
SKU: GDCLX8KIT
Brand: Gardiner Pole Systems
$160.00
Carbon Filter - 10in
For DI Systems - 10in x 2.5in
SKU: WPCF10
Brand: WCW
Standard Modular Extension #10
- Includes a protective ring, does not necessarily require the use of an end cap
- Adds 5.25ft (160cm)
- 475g
- Designed to work with either SMAX or Xtreme Poles
- Use a maximum of 3 on any pole
- If you need to add more then go for the Hi-Strength #10 sections (up to 6)
$12.00
Verdi High-Flow Pole Tube - 5m Lengths
10mm OD - 5m Lengths
SKU: WCWVSF10mmPT5m
Brand: Verdi
$18.50
More From This Category
6mm/8mm Push Fit Y-fitting
6 - 8 - 6 mm
SKU: WF6-8-6Y
Brand: WCW
2 x 6mm - 1 x 8mm
The New Quick Connect Block Off
- Handy way to seal your DI or RO system after use to stop water leaking in transport
- Quick connect to any regular tap adapter
- Block off plug is siliconed in place for excellent sealing
- Hole in the plug so you can tether block offs to your tank
- Price is per block off
$2.50
10mm Push Fit Straight Joiner
SKU: WF10mmSTR
Claber 12mm quick connect hose joiner
- Allows you to quickly and easily change hose-end accessories without twisting or wrenching
- Non-corrosive construction
- For cold water outdoor irrigation use only
$2.80
10mm Push fit to 1/4in BSB Thread
SKU: WF10mm14BSB
Spray Buddy - Soft Wash Spray Nozzle
- Twin 65-degree Fan Jet Nozzle - Best suited for Med-High Flow spraying
- 8mm Push-Fit Tee fitting to connect to your pole tube
- Designed for spraying Water, Soft Wash Mix, Sealers, Pesticides etc.
- Simple and lightweight design
- Easily adapt onto any Gardiner Quick-Loq adapter
- Plastic and Stainless Steel parts for chemical resistance
- Also available in a Single Nozzle version
- Designed and made by Window Cleaning World
- DO NOT EXPOSE TO EXCESSIVE HEAT - TOOL MAY DEFORM
$5.00