Claber Metal 40 with 80m of 8mm Hose

Claber brand

SKU: CLHR40_8mmKIT

Brand: Claber

Twin Tank 2 x 12.5 litre DI Pure Water System

*** NEW *** This new system from Window Cleaning World maximises the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.

SAVE ON Resin Costs by up to 30%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used.  Please note that the flow rate is not accurate as it is designed for flows between 3-100 ltr/min.  Typical WFP use is about 1-2 litres/min.  After a while you will be able to gauge resin use better by the flow totals.  Keep a record...
• Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$195.00

The Injector - Soap Dispenser

Dispense Chemicals

SKU: WPINJECTOR

Brand: WCW

Speed up water fed window cleaning

Twin Tank 2 x 12.5 litre DI Pure Water System

*** NEW *** This new system from Window Cleaning World maximises the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.

SAVE ON Resin Costs by up to 30%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used.  Please note that the flow rate is not accurate as it is designed for flows between 3-100 ltr/min.  Typical WFP use is about 1-2 litres/min.  After a while you will be able to gauge resin use better by the flow totals.  Keep a record...
• Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$150.00

8 Litre Lift & Carry DI Pure Water System Kit

8L Kit

SKU: WPDI8COMPLETEKIT

Brand: WCW

Small System, Perfect for Houses

Twin Tank 2 x 12.5 litre DI Pure Water System

*** NEW *** This new system from Window Cleaning World maximises the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.

SAVE ON Resin Costs by up to 30%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used.  Please note that the flow rate is not accurate as it is designed for flows between 3-100 ltr/min.  Typical WFP use is about 1-2 litres/min.  After a while you will be able to gauge resin use better by the flow totals.  Keep a record...
• Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$220.00

12.5L Short DI Lift & Carry System Kit

12.5L Kit

SKU: WPDI12.5SHORTCOMPKIT

Brand: WCW

Add Resin and a TDS Meter Here

Twin Tank 2 x 12.5 litre DI Pure Water System

*** NEW *** This new system from Window Cleaning World maximises the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.

SAVE ON Resin Costs by up to 30%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used.  Please note that the flow rate is not accurate as it is designed for flows between 3-100 ltr/min.  Typical WFP use is about 1-2 litres/min.  After a while you will be able to gauge resin use better by the flow totals.  Keep a record...
• Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$275.00

Twin 2 x 8 Ltr DI Trolley Pure Water System

With Flow Meter & 3 x TDS Meters

SKU: z_WPDITWIN8LTR_KIT

Brand: WCW

12.5L DI Tank

• 3/4" Ports suitable to 20mm plumbing fittings​ - Single DI Vessels
• 1" Ports suitable to 20mm plumbing fittings - Twin Tank Systems
• 12.5L DI tank holds 12.5L of resin
• Make your own DI or customise an existing setup!
• Sold as a complete tank with riser tube, head and riser tube top and bottom baskets complete ready for plumbing to be installed onto
• 24" riser tube
• 7x24 DI Tank, 2.5" Opening

$695.00

3K HM S-Max-50, 100% HM 3K Carbon Pole

50 Foot - 15 Metres

SKU: GDSMAX503K_KIT

Brand: Gardiner Pole Systems

Assemble pole & components here

Twin Tank 2 x 12.5 litre DI Pure Water System

*** NEW *** This new system from Window Cleaning World maximises the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.

SAVE ON Resin Costs by up to 30%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used.  Please note that the flow rate is not accurate as it is designed for flows between 3-100 ltr/min.  Typical WFP use is about 1-2 litres/min.  After a while you will be able to gauge resin use better by the flow totals.  Keep a record...
• Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$1,885.00

Claber Aquapony Hose Reel

Add on 50M of Tube

SKU: CLHRAQPONY_KIT

Brand: Claber

Organise Your Pole Tubing!

8mm Hose Quick Connect

• Fits 6-8mm hose to a 12mm tap

From $25.00

Claber Kiros Hose Reel

Holds 50M of 6mm Hose

SKU: CLHRKIROS_KIT

Brand: Claber

Organise Your Set-up!

Twin Tank 2 x 12.5 litre DI Pure Water System

*** NEW *** This new system from Window Cleaning World maximises the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.

SAVE ON Resin Costs by up to 30%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used.  Please note that the flow rate is not accurate as it is designed for flows between 3-100 ltr/min.  Typical WFP use is about 1-2 litres/min.  After a while you will be able to gauge resin use better by the flow totals.  Keep a record...
• Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

From $30.00

Gardiner X3 Xtreme Section #1

Section #1

SKU: GDXTRX3SEC1

Brand: Gardiner Pole Systems

Replacement Section

Twin Tank 2 x 12.5 litre DI Pure Water System

*** NEW *** This new system from Window Cleaning World maximises the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.

SAVE ON Resin Costs by up to 30%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used.  Please note that the flow rate is not accurate as it is designed for flows between 3-100 ltr/min.  Typical WFP use is about 1-2 litres/min.  After a while you will be able to gauge resin use better by the flow totals.  Keep a record...
• Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$200.00

12.5L Short Tank

Tank, Head, Riser Tube with Top and Bottom Baskets

SKU: 12.5SHORTTANK_BOTH

12.5L DI Tank

• 3/4" Ports suitable to 20mm plumbing fittings​ - Single DI Vessels
• 1" Ports suitable to 20mm plumbing fittings - Twin Tank Systems
• 12.5L DI tank holds 12.5L of resin
• Make your own DI or customise an existing setup!
• Sold as a complete tank with riser tube, head and riser tube top and bottom baskets complete ready for plumbing to be installed onto
• 24" riser tube
• 7x24 DI Tank, 2.5" Opening

From $140.00

25L Tall Tank

Tank, Head, Riser Tube with Top and Bottom Baskets

SKU: 19TALLTANK_

12.5L DI Tank

• 3/4" Ports suitable to 20mm plumbing fittings​ - Single DI Vessels
• 1" Ports suitable to 20mm plumbing fittings - Twin Tank Systems
• 12.5L DI tank holds 12.5L of resin
• Make your own DI or customise an existing setup!
• Sold as a complete tank with riser tube, head and riser tube top and bottom baskets complete ready for plumbing to be installed onto
• 24" riser tube
• 7x24 DI Tank, 2.5" Opening

$190.00

4 Litre DI Lift & Carry DI Pure Water Filter

Ready to go, ideal standby tank or for home owners

SKU: WPDI4LCOMPLETE

Brand: WCW

Twin Tank 2 x 12.5 litre DI Pure Water System

*** NEW *** This new system from Window Cleaning World maximises the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.

SAVE ON Resin Costs by up to 30%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used.  Please note that the flow rate is not accurate as it is designed for flows between 3-100 ltr/min.  Typical WFP use is about 1-2 litres/min.  After a while you will be able to gauge resin use better by the flow totals.  Keep a record...
• Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$100.00