EBC Restorer - 2.5L Bottle

Removes Tyre Marks, Rust and Acid Stains

SKU: SWEBCrestore25

Brand: EBC

$35.00

SWAM 20ltr drum

Moss & Mildew Cleaner

SKU: SWAM20ltr

Brand: Softwash Australia

$185.00

SiF Sealer Sica Seal Enhance 20 ltrs

Ready to use, undiluted

SKU: SiFSicaE20L

Brand: Sif Sealers

SiF Fluoro Seal C - 5ltr Concentrate

FluoroSeal C is a penetrating, water-based, fluoropolymer sealer concentrate that provides a transparent, durable,non-film forming barrier against oil and water on stone, tile and masonary surfaces

Key Advantages:

• Provides superior oil and water repellence staining (perfect for garage floors and driveways)
• Reduces efflorescence
• High wear resistance, long life
• UV stable
• Water based, solvent and VOC free
• Non-film forming, allows breathability
• Fungal and algal resistance
• Does not alter the substrates appearance
• Does not peel or blister
• Can be applied to a damp/wet surface
• Suitable on both horizontal and vertical surfaces
• Can be spray applied

Recommended Substrates:

• Reconstituted and natural stone including granite, marble and travertine
• Clay and concrete building materials
• Unglazed tile

Application:

Read the product information before application.

• The surface to be treated should be clean and free of all contaminants.
• The surface can be damp or wet, however FluoroSeal C should not be applied to a surface that has pools of water. The pools should be removed using a broom or cloth prior to application.
• Do not apply if rain is expected within 24 hours of application. Do not apply if extreme weather conditions are expected. Do not apply if surface temperatures are above 30oC.
• FluoroSeal C is a concentrated sealer and should be diluted as follows prior to application:
  1 Part FluoroSeal C
  3 Parts Water
• A test prior to application must be performed to assess the suitability of the product.
• FluoroSeal C may be applied using a brush, roller or a low-pressure hand sprayer.
• The treated surface should be impregnated to saturation point in a single application or in two applications ‘wet on wet’. Do not allow pooling of sealer. Pools can be spread out using a soft bristled broom or lamb’s wool applicator.
• Excess sealer must be removed before drying.
• Any overspray on adjacent surfaces such as glass, metal or painted surfaces should be wiped clean with a damp rag before the sealer dries.
• Full curing may take up to 3 days. Avoid traffic for at least 24 hours.
• Equipment clean up can be performed with water.

Important Notes:

• FluoroSeal C is a penetrating sealer. It bonds with substrate capillary surfaces providing superior oil and water repellent properties. The capillaries however, remain open therefore prolonged contact of stains increases the likelihood of staining. It is strongly recommended that stains should be cleaned as soon as possible to avoid possible permanency. Ease of cleaning is greatly increased with FluoroSeal C treatment.
• The sealer will not prevent surface etching or wearing.
• A slight surface darkening may occur on some substrates

Personal Safety, First Aid, Storage & Handling:

• FluoroSeal C is a non-hazardous material. However, good industrial hygiene practises should be followed when using this product. Always wash hands after use. Consult the safety data sheet for use and handling recommendations.
• The product has a shelf life of 2 years in sealed containers under 25oC. It should be stored in closed containers in a cool, dry place.

Disclaimer

• The information given in this data sheet is correct to the best of SiF Sealers knowledge.
• Given the storage, handling and application of this material is controlled by the end user, SiF Sealers are only responsible for the quality of the product at the time of dispatch.
• It is the responsibility of the end user to determine the suitability of this material for any particular application.

$255.00

Bring It On Cleaner

950 ml bottle

SKU: BIOHWSRQrt

Brand: Bring It On

$45.00