Gardiner Pencil Jets 2 mm
$9
RRP $10.00
SAVE $1.00 (10%)
In Stock
EX GST
Gardiner Brass Pencil Jets
Price per pair (2) of jets. Available in
- 1.4mm (increased pressure when limited water flow available)
- 2mm (standard)
- 3mm for increased flow
- Can be used to replace the jets on older Gardiner Brushes
- WILL NOT WORK WITH NEWER GARDINER BRUSHES THAT USE JET CAPSULES
(GDBPJ)
Be The First To Review This Product!
Help other Window Cleaning World users shop smarter by writing reviews for products you have purchased.
More From This Category
Gardiner Overspray Kit Small
Small
SKU: GDOSKS
Brand: Gardiner Pole Systems
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 16 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Standard brushes will require 19mm screws, Xtreme Brushes MUST use 16mm screws, 19mm is too long and can potentially scratch glass
- Please note: The rinse bar does not come with the brush & gooseneck pictured
$22.50
Gardiner Super-Lite Brush Bumper 10in (25cm)
Protect your Brush, Protect the Frames!
SKU: GDSLBB
Brand: Gardiner Pole Systems
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 16 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Standard brushes will require 19mm screws, Xtreme Brushes MUST use 16mm screws, 19mm is too long and can potentially scratch glass
- Please note: The rinse bar does not come with the brush & gooseneck pictured
$14.50
Low Profile Jet Tube Kit - 4 Jet
For 4-Jet Gardiner Brushes
SKU: GDLPJET4
Gardiner Micro Jet Rinse Bar - Standard width 26cm
- 16 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Select longer screws depending on your brush and also select jet tube and push fit Tee
- Standard brushes will require 19mm screws, Xtreme Brushes MUST use 16mm screws, 19mm is too long and can potentially scratch glass
- Please note: The rinse bar does not come with the brush & gooseneck pictured
$30.00