Gardiner Pole Cap

Sizes #2 to #10

SKU: GDEC

Brand: Gardiner Pole Systems

Protect Your Pole!

From $3.50

BlackDiamond 16in (40cm) Round-Top Medium Rubber

Fits Wagtail, Ettore, Moerman, Unger, Steccone etc.

SKU: BDR16M_kit

Brand: Black Diamond

Filter Wrench

• Suitable to loosen our Blue or Clear 10" Filter Housings 
• Do not use to tighten filter housing - hand tighten filter housings only 

$3.60

BlackDiamond 36in (90cm) Round-Top Medium Rubber

Fits Wagtail, Ettore, Moerman, Unger, Steccone etc.

SKU: BDR36M_kit

Brand: Black Diamond

Filter Wrench

• Suitable to loosen our Blue or Clear 10" Filter Housings 
• Do not use to tighten filter housing - hand tighten filter housings only 

$7.80

Gardiner 6mm Microbore Hose - 50M Coil

6mm - 50 Metres

SKU: GDH6mm50M

Brand: Gardiner Pole Systems

Virtually Indestructible!

Filter Wrench

• Suitable to loosen our Blue or Clear 10" Filter Housings 
• Do not use to tighten filter housing - hand tighten filter housings only 

$90.00

Gardiner Minibore 8mm Hose 80m Coil

Premium 8mm ID Hose

SKU: GDH8mm80m

Brand: Gardiner Pole Systems

Filter Wrench

• Suitable to loosen our Blue or Clear 10" Filter Housings 
• Do not use to tighten filter housing - hand tighten filter housings only 

$140.00

John Guest Push Fit 3/8" Stem Elbow

Female 1/4" to 3/8" Stem

SKU: JG38to14SR

DI Top & Bottom Distibutor

$6.00

Black Fasty Strap

3.5m Length

SKU: Z_WFHRBlackStrap

Twin 19L DI Pure Water System

This new system from Window Cleaning World maximizes the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift very ergonomic design.

SAVE ON Resin Costs by up to 20%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• Perfect for large crews, can handle up to 4 poles at once (depending on mains tap pressure and amount of hose used)
• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the dissolved salts and sending pre-filtered water to Tank No. 2
• Instead, keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than just about any DI system in the marketplace today
• No tools are required for removing tanks for resin change - it is a simple 10-minute job.
• Triple TDS meter measures Tap water (after prefiltration), it measures TDS at Tank 1 output and also the final Tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 39 liters to fill both tanks
• Please note: Triple TDS Meter is NOT WATERPROOF. Do not leave exposed to the weather, on the back of a ute for example.
• The electronics also cannot handle direct sunlight. Cover with a cloth or keep in the shade

$14.00

John Guest Collet Locking Tool Set

Handy tools for loosening Push Fittings

SKU: JGCLT

Brand: John Guest

Twin 19L DI Pure Water System

This new system from Window Cleaning World maximizes the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift very ergonomic design.

SAVE ON Resin Costs by up to 20%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• Perfect for large crews, can handle up to 4 poles at once (depending on mains tap pressure and amount of hose used)
• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the dissolved salts and sending pre-filtered water to Tank No. 2
• Instead, keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than just about any DI system in the marketplace today
• No tools are required for removing tanks for resin change - it is a simple 10-minute job.
• Triple TDS meter measures Tap water (after prefiltration), it measures TDS at Tank 1 output and also the final Tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 39 liters to fill both tanks
• Please note: Triple TDS Meter is NOT WATERPROOF. Do not leave exposed to the weather, on the back of a ute for example.
• The electronics also cannot handle direct sunlight. Cover with a cloth or keep in the shade

$16.50