Claber Double Tap Adaptor

Run 2 Systems From 1 Tap

SKU: CLDTA

Brand: Claber

Control Flow With 2 Valves

Gardiner Quick-LoQ Goosneck Valve

• All New Design -  Version 2 - redesigned by Gardiner
• Gardiner Gooseneck Valve with Patented Inner Valve Technology
• "Control is not letting go" - Maintain full 'two-hand' control of the pole whilst controlling the water flow
• Simple and fast twist to actuate action - Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
• Twist on at the top LH corner of the window and Twist off on the bottom RH corner
• Adjustable Tension Control to allow for different brush sizes and pole heights
• Maximum recommended pole height - 50ft
• Can be operated with your hand for use on ground floor windows
• Improves speed of water control compared to a manual valve

• Fitting Instructions

• Remove old gooseneck from the pole
• Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
• Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp - ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
• Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
• Before first use ensure that all of the pole clamps are correctly tightened - it is important that the pole clamps firmly clamp the pole sections when using this valve
• adjust the gooseneck valve adjuster so that it operate with the desired force needed - TIP, when working at height this will need to be loosened off compared to ground and first floor work

• How to Operate

• Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
• When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
• Move to the next window and repeat

• Troubleshooting

• Water is not flowing through the device - ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• Water is not shutting off using the device - ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear - remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• The unit is too stiff to operate - loosen the bolt cap adjuster until desired tension is reached
• The unit is too loose and turns off too easily - tight the bolt cap adjuster until the desired tension is reached

$12.00

Claber Double Tap Adaptor

Run 2 Systems From 1 Tap

SKU: CLDTA

Brand: Claber

Control Flow With 2 Valves

Gardiner Quick-LoQ Goosneck Valve

• All New Design -  Version 2 - redesigned by Gardiner
• Gardiner Gooseneck Valve with Patented Inner Valve Technology
• "Control is not letting go" - Maintain full 'two-hand' control of the pole whilst controlling the water flow
• Simple and fast twist to actuate action - Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
• Twist on at the top LH corner of the window and Twist off on the bottom RH corner
• Adjustable Tension Control to allow for different brush sizes and pole heights
• Maximum recommended pole height - 50ft
• Can be operated with your hand for use on ground floor windows
• Improves speed of water control compared to a manual valve

• Fitting Instructions

• Remove old gooseneck from the pole
• Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
• Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp - ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
• Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
• Before first use ensure that all of the pole clamps are correctly tightened - it is important that the pole clamps firmly clamp the pole sections when using this valve
• adjust the gooseneck valve adjuster so that it operate with the desired force needed - TIP, when working at height this will need to be loosened off compared to ground and first floor work

• How to Operate

• Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
• When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
• Move to the next window and repeat

• Troubleshooting

• Water is not flowing through the device - ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• Water is not shutting off using the device - ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear - remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• The unit is too stiff to operate - loosen the bolt cap adjuster until desired tension is reached
• The unit is too loose and turns off too easily - tight the bolt cap adjuster until the desired tension is reached

$12.00

Ettore Ledge-Eze Handle

For Standard Channels

SKU: ETLDGEZEH

Brand: Ettore

Gardiner Quick-LoQ Taper Adapter (Trad Tools)

• Taper adapter allows the use of traditional tools such as Squeegee and Applicator handles to be push-fitted on to Gardiner poles and goosenecks
• Fits most traditional tool handles

$26.50

Gardiner Quick-LoQ Brush Pole Tip Type 1

Pole Insert to Brush Quick-LoQ

SKU: GDQLRN1

Brand: Gardiner Pole Systems

Gardiner Quick-LoQ Goosneck Valve

• All New Design -  Version 2 - redesigned by Gardiner
• Gardiner Gooseneck Valve with Patented Inner Valve Technology
• "Control is not letting go" - Maintain full 'two-hand' control of the pole whilst controlling the water flow
• Simple and fast twist to actuate action - Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
• Twist on at the top LH corner of the window and Twist off on the bottom RH corner
• Adjustable Tension Control to allow for different brush sizes and pole heights
• Maximum recommended pole height - 50ft
• Can be operated with your hand for use on ground floor windows
• Improves speed of water control compared to a manual valve

• Fitting Instructions

• Remove old gooseneck from the pole
• Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
• Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp - ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
• Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
• Before first use ensure that all of the pole clamps are correctly tightened - it is important that the pole clamps firmly clamp the pole sections when using this valve
• adjust the gooseneck valve adjuster so that it operate with the desired force needed - TIP, when working at height this will need to be loosened off compared to ground and first floor work

• How to Operate

• Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
• When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
• Move to the next window and repeat

• Troubleshooting

• Water is not flowing through the device - ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• Water is not shutting off using the device - ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear - remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• The unit is too stiff to operate - loosen the bolt cap adjuster until desired tension is reached
• The unit is too loose and turns off too easily - tight the bolt cap adjuster until the desired tension is reached

$15.00

Gardiner Quick-LoQ Angle Adaptor Type 1 LONG ARM

Pole Insert to Quick-LoQ Brush

SKU: GDQLRN1L

Brand: Gardiner Pole Systems

6" Arm

Gardiner Quick-LoQ Taper Adapter (Trad Tools)

• Taper adapter allows the use of traditional tools such as Squeegee and Applicator handles to be push-fitted on to Gardiner poles and goosenecks
• Fits most traditional tool handles

$18.50

Gardiner Angle Adapter Type 1 - Euro Thread

Gardiner Pole Insert to Euro Thread

SKU: GDRN1

Brand: Gardiner Pole Systems

Gardiner Quick-LoQ Taper Adapter (Trad Tools)

• Taper adapter allows the use of traditional tools such as Squeegee and Applicator handles to be push-fitted on to Gardiner poles and goosenecks
• Fits most traditional tool handles

$15.00

Gardiner Alloy Camera Mount

Camera Mount

SKU: GDCAMMOUNT

Brand: Gardiner Pole Systems

Show Customers What You Do!

Gardiner Quick-LoQ Taper Adapter (Trad Tools)

• Taper adapter allows the use of traditional tools such as Squeegee and Applicator handles to be push-fitted on to Gardiner poles and goosenecks
• Fits most traditional tool handles

$18.50

Gardiner Erkenomic Pole Tip

For Traditional Tools

SKU: GDRN1ERK

Brand: Gardiner Pole Systems

Gardiner Quick-LoQ Goosneck Valve

• All New Design -  Version 2 - redesigned by Gardiner
• Gardiner Gooseneck Valve with Patented Inner Valve Technology
• "Control is not letting go" - Maintain full 'two-hand' control of the pole whilst controlling the water flow
• Simple and fast twist to actuate action - Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
• Twist on at the top LH corner of the window and Twist off on the bottom RH corner
• Adjustable Tension Control to allow for different brush sizes and pole heights
• Maximum recommended pole height - 50ft
• Can be operated with your hand for use on ground floor windows
• Improves speed of water control compared to a manual valve

• Fitting Instructions

• Remove old gooseneck from the pole
• Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
• Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp - ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
• Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
• Before first use ensure that all of the pole clamps are correctly tightened - it is important that the pole clamps firmly clamp the pole sections when using this valve
• adjust the gooseneck valve adjuster so that it operate with the desired force needed - TIP, when working at height this will need to be loosened off compared to ground and first floor work

• How to Operate

• Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
• When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
• Move to the next window and repeat

• Troubleshooting

• Water is not flowing through the device - ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• Water is not shutting off using the device - ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear - remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• The unit is too stiff to operate - loosen the bolt cap adjuster until desired tension is reached
• The unit is too loose and turns off too easily - tight the bolt cap adjuster until the desired tension is reached

$15.00

Unger Ninja 6" Scraper

6" - 15cm

SKU: UGSCR6

Brand: Unger

Gardiner Quick-LoQ Taper Adapter (Trad Tools)

• Taper adapter allows the use of traditional tools such as Squeegee and Applicator handles to be push-fitted on to Gardiner poles and goosenecks
• Fits most traditional tool handles

$38.50

Gardiner Super-Scraper

Choose Type 1, Type 2 or Type 1 Long

SKU: GDSST

Brand: Gardiner Pole Systems

Gardiner Quick-LoQ Taper Adapter (Trad Tools)

• Taper adapter allows the use of traditional tools such as Squeegee and Applicator handles to be push-fitted on to Gardiner poles and goosenecks
• Fits most traditional tool handles

From $10.00

Gardiner QuickLoQ Euro Brush Adaptor

QuickLoq to Euro Converter

SKU: GDQLEBA

Brand: Gardiner Pole Systems

Converter

Gardiner Quick-LoQ Goosneck Valve

• All New Design -  Version 2 - redesigned by Gardiner
• Gardiner Gooseneck Valve with Patented Inner Valve Technology
• "Control is not letting go" - Maintain full 'two-hand' control of the pole whilst controlling the water flow
• Simple and fast twist to actuate action - Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
• Twist on at the top LH corner of the window and Twist off on the bottom RH corner
• Adjustable Tension Control to allow for different brush sizes and pole heights
• Maximum recommended pole height - 50ft
• Can be operated with your hand for use on ground floor windows
• Improves speed of water control compared to a manual valve

• Fitting Instructions

• Remove old gooseneck from the pole
• Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
• Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp - ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
• Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
• Before first use ensure that all of the pole clamps are correctly tightened - it is important that the pole clamps firmly clamp the pole sections when using this valve
• adjust the gooseneck valve adjuster so that it operate with the desired force needed - TIP, when working at height this will need to be loosened off compared to ground and first floor work

• How to Operate

• Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
• When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
• Move to the next window and repeat

• Troubleshooting

• Water is not flowing through the device - ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• Water is not shutting off using the device - ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear - remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• The unit is too stiff to operate - loosen the bolt cap adjuster until desired tension is reached
• The unit is too loose and turns off too easily - tight the bolt cap adjuster until the desired tension is reached

$8.50

Gardiner QuickLoQ Swivel Adapter

Instantly convert fixed angle adaptor to swivelling

SKU: GDQLSA

Brand: Gardiner Pole Systems

Quick-LoQ Swivel Adaptor

Gardiner Quick-LoQ Goosneck Valve

• All New Design -  Version 2 - redesigned by Gardiner
• Gardiner Gooseneck Valve with Patented Inner Valve Technology
• "Control is not letting go" - Maintain full 'two-hand' control of the pole whilst controlling the water flow
• Simple and fast twist to actuate action - Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
• Twist on at the top LH corner of the window and Twist off on the bottom RH corner
• Adjustable Tension Control to allow for different brush sizes and pole heights
• Maximum recommended pole height - 50ft
• Can be operated with your hand for use on ground floor windows
• Improves speed of water control compared to a manual valve

• Fitting Instructions

• Remove old gooseneck from the pole
• Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
• Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp - ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
• Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
• Before first use ensure that all of the pole clamps are correctly tightened - it is important that the pole clamps firmly clamp the pole sections when using this valve
• adjust the gooseneck valve adjuster so that it operate with the desired force needed - TIP, when working at height this will need to be loosened off compared to ground and first floor work

• How to Operate

• Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
• When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
• Move to the next window and repeat

• Troubleshooting

• Water is not flowing through the device - ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• Water is not shutting off using the device - ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear - remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• The unit is too stiff to operate - loosen the bolt cap adjuster until desired tension is reached
• The unit is too loose and turns off too easily - tight the bolt cap adjuster until the desired tension is reached

$15.00

Gardiner Quick-LoQ Angle Adapter Type 1, Long Swivel

Pole Insert to Quick-LoQ Brush

SKU: GDQLRN1SL

Brand: Gardiner Pole Systems

Long Arm with Swivel Adaptor

Gardiner Quick-LoQ Goosneck Valve

• All New Design -  Version 2 - redesigned by Gardiner
• Gardiner Gooseneck Valve with Patented Inner Valve Technology
• "Control is not letting go" - Maintain full 'two-hand' control of the pole whilst controlling the water flow
• Simple and fast twist to actuate action - Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
• Twist on at the top LH corner of the window and Twist off on the bottom RH corner
• Adjustable Tension Control to allow for different brush sizes and pole heights
• Maximum recommended pole height - 50ft
• Can be operated with your hand for use on ground floor windows
• Improves speed of water control compared to a manual valve

• Fitting Instructions

• Remove old gooseneck from the pole
• Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
• Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp - ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
• Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
• Before first use ensure that all of the pole clamps are correctly tightened - it is important that the pole clamps firmly clamp the pole sections when using this valve
• adjust the gooseneck valve adjuster so that it operate with the desired force needed - TIP, when working at height this will need to be loosened off compared to ground and first floor work

• How to Operate

• Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
• When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
• Move to the next window and repeat

• Troubleshooting

• Water is not flowing through the device - ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• Water is not shutting off using the device - ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear - remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• The unit is too stiff to operate - loosen the bolt cap adjuster until desired tension is reached
• The unit is too loose and turns off too easily - tight the bolt cap adjuster until the desired tension is reached

$30.00