Wagtail High Flyer V2

7" - 18" (18cm-45cm)

SKU: WAGHF

Brand: Wagtail Cleaning Tools

Ultimate Combination Tool

Unger ErgoTec Squeegee Handle - standard size

• Ergonomic lightweight squeegee handle for less hand fatigue
• Non slip grip is nice to hold
• Stainless steel head with finger indent for extra control
• Quick rubber/channel changing with spring loaded clamp mechanism
• Only works with Unger S Channels
• Handle length 15cm

From $44.50

Ettore Rubber 18" (45cm)

18" (45cm)

SKU: ETR18

Brand: Ettore

Guaranteed Streak-Free Results

Switch-Mop Replacement Scrub Strips

• Direct replacement for your Switch-Mop
• Hook velcro backed

$6.45

Unger Ninja Bucket on a Belt

Spins 360 Degrees

SKU: UGBOB

Brand: Unger

Unger Ergotec Padded Belt

• Sturdy nylon padded belt. 
• Holds any combination of the ErgoTec belt range.
• Having everything right there at your fingertips, cloths, scrapers, drinks, receipt books, mobile etc. etc. saves you time.
• Has 4 clips for special "d hook" attachment for straps and a quick release closure.
• Size:32" x 50"/80 x 130cm.

$62.50

Ettore Tool Belt

Ettore

SKU: ETBLT

Brand: Ettore

Useful with an Ettore Side Kick!

Unger Ergotec Padded Belt

• Sturdy nylon padded belt. 
• Holds any combination of the ErgoTec belt range.
• Having everything right there at your fingertips, cloths, scrapers, drinks, receipt books, mobile etc. etc. saves you time.
• Has 4 clips for special "d hook" attachment for straps and a quick release closure.
• Size:32" x 50"/80 x 130cm.

$39.50

Tool Belt with 1 Loop

Belt

SKU: WCWTBLT1loop

Brand: WCW

1 Loop to Hold Rags

Unger Ergotec Padded Belt

• Sturdy nylon padded belt. 
• Holds any combination of the ErgoTec belt range.
• Having everything right there at your fingertips, cloths, scrapers, drinks, receipt books, mobile etc. etc. saves you time.
• Has 4 clips for special "d hook" attachment for straps and a quick release closure.
• Size:32" x 50"/80 x 130cm.

$21.50

Ettore Rubber 12" (30cm)

12" (30cm)

SKU: ETR12

Brand: Ettore

Guaranteed Streak-Free Results

Gardiner Control Bar Handle #9

• Improved ergonomic grip
• Keeps the wrist of the weight-bearing arm straight
• Easily slip onto a #9 pole section
• Use on SMax-50, Ultimate-46, Xtreme-47 etc.

$5.40

Ettore Brass Channel

6" - 22" (15cm-55cm)

SKU: ETBC

Brand: Ettore

Original Brass Squeegee Channel

6mm/8mm Push Fit TEE

• 8mm OD input - 2x 6mm OD outputs
• Designed for Gardiner brushes with lightweight 6mm Jet Tube

From $17.80

Gardiner Super-Lite Medium Mixed Brush - 10in

All-Rounder Water-Fed Brush

SKU: GDBSLDTM

Brand: Gardiner Pole Systems

Gardiner Quick-LoQ Goosneck Valve

• All New Design -  Version 2 - redesigned by Gardiner
• Gardiner Gooseneck Valve with Patented Inner Valve Technology
• "Control is not letting go" - Maintain full 'two-hand' control of the pole whilst controlling the water flow
• Simple and fast twist to actuate action - Twist clockwise on the handle to open and twist anti-clockwise on the handle to close
• Twist on at the top LH corner of the window and Twist off on the bottom RH corner
• Adjustable Tension Control to allow for different brush sizes and pole heights
• Maximum recommended pole height - 50ft
• Can be operated with your hand for use on ground floor windows
• Improves speed of water control compared to a manual valve

• Fitting Instructions

• Remove old gooseneck from the pole
• Take the hose coming up the pole and push-fit into the 8mm push fit connector o the base of the gooseneck valve assembly
• Slide the gooseneck valve into the top of the pole, push fully in and close the top clamp - ensure that the top pole clamp is firmly tightened so that it holds the gooseneck valve base with it being able to spin
• Fit a brush to the top of the gooseneck valve and connect the brush T connector to the top piece of tube from the valve
• Before first use ensure that all of the pole clamps are correctly tightened - it is important that the pole clamps firmly clamp the pole sections when using this valve
• adjust the gooseneck valve adjuster so that it operate with the desired force needed - TIP, when working at height this will need to be loosened off compared to ground and first floor work

• How to Operate

• Extend the pole to the window, position the brush in the top left hand corner of the window and twist the pole to the right (clockwise from the pole base)
• When finished position the brush head on the bottom right hand corner of the window and twist the pole to the left (anti-clockwise from the pole base)
• Move to the next window and repeat

• Troubleshooting

• Water is not flowing through the device - ensure that the device is turned on, check the device is not frozen, the unit could have a dirt blockage to clear remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• Water is not shutting off using the device - ensure that the device is firmly clamped in the top section of the pole. The unit could have a dirt blockage to clear - remove the gooseneck from the pole turn around and connect the top hose to the pole hose and flush dirt out.
• The unit is too stiff to operate - loosen the bolt cap adjuster until desired tension is reached
• The unit is too loose and turns off too easily - tight the bolt cap adjuster until the desired tension is reached

$64.00

Ettore Work Pouch

2 Large Pockets

SKU: ETWP2P

Brand: Ettore

Tool Belt with 1 loop

• One large loop for holding Bluey or scrim cloth

$34.50

Ettore Dual Leather Squeegee Holster

Holds 2 Squeegees

SKU: ETDLSH

Brand: Ettore

Tool Belt with 1 loop

• One large loop for holding Bluey or scrim cloth

$38.50

Ettore Single Leather Holster

Holds 1 Squeegee

SKU: ETSH

Brand: Ettore

Tool Belt with 1 loop

• One large loop for holding Bluey or scrim cloth

$27.50