25L DI Tank

Includes riser and tank head

SKU: 25LTANK_kit

Brand: WCW

$195.00

Gardiner 6mm Microbore Hose - 50M Coil

6mm - 50 Metres

SKU: GDH6mm50M

Brand: Gardiner Pole Systems

Twin 19L DI Pure Water Trolley System

This new system from Window Cleaning World maximizes the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift very ergonomic design.

SAVE ON Resin Costs by up to 20%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• Perfect for large crews, can handle up to 4 poles at once (depending on mains tap pressure and amount of hose used)
• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the dissolved salts and sending pre-filtered water to Tank No. 2
• Instead, keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than just about any DI system in the marketplace today
• No tools are required for removing tanks for resin change - it is a simple 10-minute job.
• Triple TDS meter measures Tap water (after prefiltration), it measures TDS at Tank 1 output and also the final Tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 39 liters to fill both tanks
• Please note: Triple TDS Meter is NOT WATERPROOF. Do not leave exposed to the weather, on the back of a ute for example.
• The electronics also cannot handle direct sunlight. Cover with a cloth or keep in the shade

$90.00

Claber Tap Connector for aerator tap

Connect a hose to a kitchen tap

SKU: CLTCM34

Brand: Claber

John Guest SpeedFit 1/2" Push Fit to 1/2" BSP Thread

• Female 1/2" tube insert to 1/2" BSP Thread
• These fittings are used on the X-ION MAX & Mini
• Not compatable with any other tube we supply other than 1/2" JG Tube
• If you are unsure of what fittings you need, please contact us first.
•  NOTE: Normal hex sockets cannot be used as this fitting has an 8 sided hex, not 6 sided. We do have a custom tool available specifically for this fitting, please contact us for this. Do Not Overtighten when tourqing this fitting down. 

$23.50

John Guest Push Fit 1/2" Tee

1/2" to 1/2" to 1/2"

SKU: JGETEE12in

Brand: John Guest

Shurflo Pump Heatsink

This clip-on heatsink is an easy and effective way to help your pump stay cooler under load or in hot climates.

• Will fit on Shurflo 107psi pumps or Scintex 160psi pumps
• Aluminium build

$8.00

Vontron 40" Ultra Low Pressure RO Membrane

Suits The X-ION MAX & Lite RO's

SKU: EWPROXLP11-4040

Brand: Vontron

Shurflo Pump Heatsink

This clip-on heatsink is an easy and effective way to help your pump stay cooler under load or in hot climates.

• Will fit on Shurflo 107psi pumps or Scintex 160psi pumps
• Aluminium build

$299.00

John Guest 1/2" Elbow

Female to Female

SKU: JGELBOWEQ

Shurflo Pump Heatsink

This clip-on heatsink is an easy and effective way to help your pump stay cooler under load or in hot climates.

• Will fit on Shurflo 107psi pumps or Scintex 160psi pumps
• Aluminium build

$7.00