Take the hassle out of cleaning louvres - Cuts down cleaning time by 50%-75%
Add this kit to your water-fed system, 20L X-ION Spray Pack or X-ION TT1
Eliminates the need to squeegee or detail louvres
Simply scrub the louvre your preferred way, then rinse all the solution and dirt away with this simple tool. Add in the Louvre Buddy for the faster louvre cleaning set up!
The WCW Slot Cutter is designed and made by Window Cleaning World. Printed in-house on our Prusa 3D Printers
The WCW Slot Cutter securely holds 2x removable 1" Razor Blades to provide easy and accurate parallel cuts in the tube
The tube can be re-cut when the ends wear out
This kit comes with a length of 12mm(od) Tube, 12mm-8mm push-fit fitting and the WCW Slot Cutter
This brand new Spray Pack is excellent for mobile water-fed cleaning, solar panel cleaning, applying Sif Sealersand light soft washing.
Customise your kit by adding in 8mm Pole Tube and Louvre tools. All accessories listed are compatable with the 20L Spray Pack.
If you order more than 1x 5m Length of pole tube, the order will be sent with one continuous length, for example, you order 3x 5m Lengths of pole tube, you will receive a 15m Length of pole tube.
Features -
Max Flow - 4.5L/pm
Variable flow rate control
Comfortable harness/shoulder straps
Rounded back for a comfortable fit
Rechargeable, 12V Lithium Ion Battery for 5+ hours of working time
Easily connect 8mm(od) pole tube to the valve for mobile water-fed cleaning, soft-washing etc.
Comes with -
240V Australian Plug battery charger
Spray Trigger w/ extendable lance and an assortment of spray nozzles
Modified hose connection to use Spray trigger or 8mm(od) pole tube for water-fed cleaning
Very comfortable straps to carry as a backpack
Measuring cup for chemical dosing, ie. Soft wash mixes.
Does not come with -
8mm pole tube - The built in hose is not long enough to be used with a pole, or long enough to be sat on the ground and used at length.
Yellow hose and Pole/Brush combo in Photo #2 - for display only.
Note: This does not purify water , it is to be filled with liquids and will pump as you need.
We highly recommend flushing the tank and pump with fresh water after using chemicals.
This package comes with everything you need to clean windows up to 2 storeys high. This is an excellent package to learn and professionally clean outside windows.
Kit Includes:
Telescopic Pole: CLX-22ft is a lightweight high-quality carbon fiber composite waterfed pole. Max extension of 6.7m, Closed length of 1.49m.
Pole Tip: Gardiner Quick-LoQ Brush Pole Tip to connect the pole and brush.
Brush: Gardiner Super-Lite Medium Mixed Brush comes ready to plug into your pole hose kit
Pole Hose: 15m Pole Hose Kit with valve. You can run this internally or externally to your Gardiner 22ft pole.
Pure Water System: 8L DI Pure Water System comes filled with 8L of resin so you can start cleaning immediately.
TDS Meter: Use this meter to check the output water.It is very important to monitor your resin output
Funnel: Use this to refill your tank with resin, once your resin is spent.
Lead Hose: 1x 1.5m lead hose to connect your DI tank to a tap
FAQ's
How long will the resin last before I need to change it?
With a water input of 100ppm, this 8L tank should filter around 2000L of water. This roughly equates to around 20 hours of normal water-fed cleaning.
When do I need to change the resin?
When the output TDS tests 20ppm or higher.
How much resin do I need to fill the tank?
8L of resin is needed to fill the tank to slightly underneath the tank head threads.
When do I need to change the Carbon Filter?
As a guide, change the carbon filter every 3rd time the resin is changed.