304 SS end clamp pressure vessel membrane housing for housing 4″ x 40″ membrane elements.
Enhanced system appearance with sleek stainless steel fixing bands complete with rubber saddle and bolts
Ready to fix to a panel, trolley or wall
Stainless steel membrane pressure vessels are considered safer and more reliable than PVC membrane pressure vessels.
The end clamp, end entry design saves both time and money, and is designed for ease of installing and replacing membrane elements
End caps with 3/4" BSP female feed and waste ports - 1/2" BSP female permeate ports
Each membrane housing is sold complete with End Caps, End Clamps, O-Rings, Rubber Mounting Pads and Stainless Saddle Straps.
Maximum pressure: 300 psi
Stainless Steel Pressure Vessel Membrane Housings are used to house Reverse Osmosis (RO), Ultrafiltration (UF), Nanofiltration (NF), and Microfiltration (MF) membrane elements in water treatment systems
This package will make cleaning your house a fun chore that you'll look forward to. No longer will you have to struggle with extension ladders, you can just brush the window, rinse it off and have a spot-free finish with no need to use a squeegee. The DI tank contains 4L of resin, which takes the salts and solids out of the water so that you can have a spot-free finish just by brushing the window with a pole and brush. This package contains everything that you will need to clean your own windows, with limited ongoing costs.
With a water supply of around 80-100ppm, you can expect 1000L of filtered water from the 4L Di tank, or around 10 hours of window cleaning. Results will vary by location and water sources.
The resin contained in the 4L Di tank will need to be changed when the TDS exceeds 20ppm(see the below video for more information on TDS and water testing)
Kit Includes:
Telescopic Pole: Unger N-Lite 6m Aluminium Pole to 2-storey windows.
Pole Tip: Gardiner Quick-Loq Pole Tip to connect the pole and brush.
Brush: Gardiner Ultimate Nylon Brush comes ready to plug into your pole hose kit.
Pole Hose: 11m Pole Hose Kit
Pure Water Treatment System: 4L Lift & Carry DI Pure Water System comes filled with 4L of resin to get you cleaning straight away.
Hand-Held TDS Meter: This is to check when you will need to replace the resin, which is important to avoid water spots showing on windows.
Lead Hose: 1.5M of hose with fittings attached comes included to connect the tank to a water source.
This package will make cleaning your house a fun chore that you'll look forward to. No longer will you have to struggle with extension ladders, you can just brush the window, rinse it off and have a spot-free finish with no need to use a squeegee. The DI tank contains 4L of resin, which takes the salts and solids out of the water so that you can have a spot-free finish just by brushing the window with a pole and brush. This package contains everything that you will need to clean your own windows, with limited ongoing costs.
With a water supply of around 80-100ppm, you can expect 1000L of filtered water from the 4L Di tank, or around 10 hours of window cleaning. Results will vary by location and water sources.
The resin contained in the 4L Di tank will need to be changed when the TDS exceeds 20ppm(see the below video for more information on TDS and water testing)
Kit Includes:
Telescopic Pole: Unger N-Lite 6m Aluminium Pole to 2-storey windows.
Pole Tip: Gardiner Quick-Loq Pole Tip to connect the pole and brush.
Brush: Gardiner Ultimate Nylon Brush comes ready to plug into your pole hose kit.
Pole Hose: 11m Pole Hose Kit
Pure Water Treatment System: 4L Lift & Carry DI Pure Water System comes filled with 4L of resin to get you cleaning straight away.
Hand-Held TDS Meter: This is to check when you will need to replace the resin, which is important to avoid water spots showing on windows.
Lead Hose: 1.5M of hose with fittings attached comes included to connect the tank to a water source.
This package will make cleaning your house a fun chore that you'll look forward to. No longer will you have to struggle with extension ladders, you can just brush the window, rinse it off and have a spot-free finish with no need to use a squeegee. The DI tank contains 4L of resin, which takes the salts and solids out of the water so that you can have a spot-free finish just by brushing the window with a pole and brush. This package contains everything that you will need to clean your own windows, with limited ongoing costs.
With a water supply of around 80-100ppm, you can expect 1000L of filtered water from the 4L Di tank, or around 10 hours of window cleaning. Results will vary by location and water sources.
The resin contained in the 4L Di tank will need to be changed when the TDS exceeds 20ppm(see the below video for more information on TDS and water testing)
Kit Includes:
Telescopic Pole: Unger N-Lite 6m Aluminium Pole to 2-storey windows.
Pole Tip: Gardiner Quick-Loq Pole Tip to connect the pole and brush.
Brush: Gardiner Ultimate Nylon Brush comes ready to plug into your pole hose kit.
Pole Hose: 11m Pole Hose Kit
Pure Water Treatment System: 4L Lift & Carry DI Pure Water System comes filled with 4L of resin to get you cleaning straight away.
Hand-Held TDS Meter: This is to check when you will need to replace the resin, which is important to avoid water spots showing on windows.
Lead Hose: 1.5M of hose with fittings attached comes included to connect the tank to a water source.
304 SS end clamp pressure vessel membrane housing for housing 4″ x 40″ membrane elements.
Enhanced system appearance with sleek stainless steel fixing bands complete with rubber saddle and bolts
Ready to fix to a panel, trolley or wall
Stainless steel membrane pressure vessels are considered safer and more reliable than PVC membrane pressure vessels.
The end clamp, end entry design saves both time and money, and is designed for ease of installing and replacing membrane elements
End caps with 3/4" BSP female feed and waste ports - 1/2" BSP female permeate ports
Each membrane housing is sold complete with End Caps, End Clamps, O-Rings, Rubber Mounting Pads and Stainless Saddle Straps.
Maximum pressure: 300 psi
Stainless Steel Pressure Vessel Membrane Housings are used to house Reverse Osmosis (RO), Ultrafiltration (UF), Nanofiltration (NF), and Microfiltration (MF) membrane elements in water treatment systems
Tank, Head, Riser Tube with Top and Bottom Baskets
From $140.00EX GST
8L Tank
Tank, Head, Riser Tube with Top and Bottom Baskets
SKU: 8LTANK_1_Both_
304 Stainless Steel RO Filter Housing 4x40in
304 SS end clamp pressure vessel membrane housing for housing 4″ x 40″ membrane elements.
Enhanced system appearance with sleek stainless steel fixing bands complete with rubber saddle and bolts
Ready to fix to a panel, trolley or wall
Stainless steel membrane pressure vessels are considered safer and more reliable than PVC membrane pressure vessels.
The end clamp, end entry design saves both time and money, and is designed for ease of installing and replacing membrane elements
End caps with 3/4" BSP female feed and waste ports - 1/2" BSP female permeate ports
Each membrane housing is sold complete with End Caps, End Clamps, O-Rings, Rubber Mounting Pads and Stainless Saddle Straps.
Maximum pressure: 300 psi
Stainless Steel Pressure Vessel Membrane Housings are used to house Reverse Osmosis (RO), Ultrafiltration (UF), Nanofiltration (NF), and Microfiltration (MF) membrane elements in water treatment systems
304 SS end clamp pressure vessel membrane housing for housing 4″ x 40″ membrane elements.
Enhanced system appearance with sleek stainless steel fixing bands complete with rubber saddle and bolts
Ready to fix to a panel, trolley or wall
Stainless steel membrane pressure vessels are considered safer and more reliable than PVC membrane pressure vessels.
The end clamp, end entry design saves both time and money, and is designed for ease of installing and replacing membrane elements
End caps with 3/4" BSP female feed and waste ports - 1/2" BSP female permeate ports
Each membrane housing is sold complete with End Caps, End Clamps, O-Rings, Rubber Mounting Pads and Stainless Saddle Straps.
Maximum pressure: 300 psi
Stainless Steel Pressure Vessel Membrane Housings are used to house Reverse Osmosis (RO), Ultrafiltration (UF), Nanofiltration (NF), and Microfiltration (MF) membrane elements in water treatment systems
304 SS end clamp pressure vessel membrane housing for housing 4″ x 40″ membrane elements.
Enhanced system appearance with sleek stainless steel fixing bands complete with rubber saddle and bolts
Ready to fix to a panel, trolley or wall
Stainless steel membrane pressure vessels are considered safer and more reliable than PVC membrane pressure vessels.
The end clamp, end entry design saves both time and money, and is designed for ease of installing and replacing membrane elements
End caps with 3/4" BSP female feed and waste ports - 1/2" BSP female permeate ports
Each membrane housing is sold complete with End Caps, End Clamps, O-Rings, Rubber Mounting Pads and Stainless Saddle Straps.
Maximum pressure: 300 psi
Stainless Steel Pressure Vessel Membrane Housings are used to house Reverse Osmosis (RO), Ultrafiltration (UF), Nanofiltration (NF), and Microfiltration (MF) membrane elements in water treatment systems
304 SS end clamp pressure vessel membrane housing for housing 4″ x 40″ membrane elements.
Enhanced system appearance with sleek stainless steel fixing bands complete with rubber saddle and bolts
Ready to fix to a panel, trolley or wall
Stainless steel membrane pressure vessels are considered safer and more reliable than PVC membrane pressure vessels.
The end clamp, end entry design saves both time and money, and is designed for ease of installing and replacing membrane elements
End caps with 3/4" BSP female feed and waste ports - 1/2" BSP female permeate ports
Each membrane housing is sold complete with End Caps, End Clamps, O-Rings, Rubber Mounting Pads and Stainless Saddle Straps.
Maximum pressure: 300 psi
Stainless Steel Pressure Vessel Membrane Housings are used to house Reverse Osmosis (RO), Ultrafiltration (UF), Nanofiltration (NF), and Microfiltration (MF) membrane elements in water treatment systems
304 SS end clamp pressure vessel membrane housing for housing 4″ x 40″ membrane elements.
Enhanced system appearance with sleek stainless steel fixing bands complete with rubber saddle and bolts
Ready to fix to a panel, trolley or wall
Stainless steel membrane pressure vessels are considered safer and more reliable than PVC membrane pressure vessels.
The end clamp, end entry design saves both time and money, and is designed for ease of installing and replacing membrane elements
End caps with 3/4" BSP female feed and waste ports - 1/2" BSP female permeate ports
Each membrane housing is sold complete with End Caps, End Clamps, O-Rings, Rubber Mounting Pads and Stainless Saddle Straps.
Maximum pressure: 300 psi
Stainless Steel Pressure Vessel Membrane Housings are used to house Reverse Osmosis (RO), Ultrafiltration (UF), Nanofiltration (NF), and Microfiltration (MF) membrane elements in water treatment systems
304 SS end clamp pressure vessel membrane housing for housing 4″ x 40″ membrane elements.
Enhanced system appearance with sleek stainless steel fixing bands complete with rubber saddle and bolts
Ready to fix to a panel, trolley or wall
Stainless steel membrane pressure vessels are considered safer and more reliable than PVC membrane pressure vessels.
The end clamp, end entry design saves both time and money, and is designed for ease of installing and replacing membrane elements
End caps with 3/4" BSP female feed and waste ports - 1/2" BSP female permeate ports
Each membrane housing is sold complete with End Caps, End Clamps, O-Rings, Rubber Mounting Pads and Stainless Saddle Straps.
Maximum pressure: 300 psi
Stainless Steel Pressure Vessel Membrane Housings are used to house Reverse Osmosis (RO), Ultrafiltration (UF), Nanofiltration (NF), and Microfiltration (MF) membrane elements in water treatment systems
304 SS end clamp pressure vessel membrane housing for housing 4″ x 40″ membrane elements.
Enhanced system appearance with sleek stainless steel fixing bands complete with rubber saddle and bolts
Ready to fix to a panel, trolley or wall
Stainless steel membrane pressure vessels are considered safer and more reliable than PVC membrane pressure vessels.
The end clamp, end entry design saves both time and money, and is designed for ease of installing and replacing membrane elements
End caps with 3/4" BSP female feed and waste ports - 1/2" BSP female permeate ports
Each membrane housing is sold complete with End Caps, End Clamps, O-Rings, Rubber Mounting Pads and Stainless Saddle Straps.
Maximum pressure: 300 psi
Stainless Steel Pressure Vessel Membrane Housings are used to house Reverse Osmosis (RO), Ultrafiltration (UF), Nanofiltration (NF), and Microfiltration (MF) membrane elements in water treatment systems
Medium Hard compound to suit warmer weather - lasts longer than soft rubber
A popular choice of professional window cleaners throughout the world for the last 15 years
BlackDiamond Round-Top Soft is a rubber replacement that fits Wagtail, Ettore, Steccone, Moerman, Unger and other round profile channels.
Ready cut lengths up to 102cm (40")
Natural moulded rubber
Unique double moulding and cutting of rubber inside the mold. Simply pull the a pair of rubbers apart. The all important edge stays better protected when stored as a pair.