Claber Metal 40 with 80m of 8mm Hose

Claber brand

SKU: CLHR40_8mmKIT

Brand: Claber

Twin Tank 2 x 8 litre DI Pure Water System

*** NEW *** This new system from Window Cleaning World maximises the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.

SAVE ON Resin Costs by up to 30%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used.  Please note that the flow rate is not accurate as it is designed for flows between 3-100 lytr/min.  Typical WFP use is about 1-2 litres/min.  After a while you will be able to gauge resin use better by the flow totals.  Keep a record...
• Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$250.00

Claber Metal 40 6mm Complete Package

Claber brand

SKU: CLHR40_6mm100KIT

Brand: Claber

Twin Tank 2 x 8 litre DI Pure Water System

*** NEW *** This new system from Window Cleaning World maximises the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.

SAVE ON Resin Costs by up to 30%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used.  Please note that the flow rate is not accurate as it is designed for flows between 3-100 lytr/min.  Typical WFP use is about 1-2 litres/min.  After a while you will be able to gauge resin use better by the flow totals.  Keep a record...
• Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$237.50

ABC Steelwool Ultra Fine Grade 0000

300g pack (12 pads)

SKU: SWABC0000

Brand: Sifa

Use on Glass & Frames for Stubborn Stains

Gutter Getter Scoop

• Red gutter cleaning scoop
• Save time and hands and easily scoop leaves out of gutters
• Can also be used as a poop scoop if you have pets

$14.80

Sorbo Rubber 16" (40cm)

16" (40cm)

SKU: SBR16

Brand: Sorbo

Fits Standard Channels

Twin Tank 2 x 8 litre DI Pure Water System

*** NEW *** This new system from Window Cleaning World maximises the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.

SAVE ON Resin Costs by up to 30%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used.  Please note that the flow rate is not accurate as it is designed for flows between 3-100 lytr/min.  Typical WFP use is about 1-2 litres/min.  After a while you will be able to gauge resin use better by the flow totals.  Keep a record...
• Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$4.55

Sorbo Rubber 36" (90cm)

36" (90cm)

SKU: SBR36

Brand: Sorbo

Fits Standard Channels

Twin Tank 2 x 8 litre DI Pure Water System

*** NEW *** This new system from Window Cleaning World maximises the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.

SAVE ON Resin Costs by up to 30%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used.  Please note that the flow rate is not accurate as it is designed for flows between 3-100 lytr/min.  Typical WFP use is about 1-2 litres/min.  After a while you will be able to gauge resin use better by the flow totals.  Keep a record...
• Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$9.05

Ettore Rubber 18" (45cm)

18" (45cm)

SKU: ETR18

Brand: Ettore

Guaranteed Streak-Free Results

Wagtail Blue Replacement High Flyer Pad

• Durable micro-fibre replacement pad for Wagtail High Flyer's

$4.95

Ettore Brass Back Flip 14" (35cm)

14" (35cm)

SKU: ETBCKFLP14

Brand: Ettore

2 Products in One Tool

Sorbo Tricket with Squeegees

Tricket The most efficient way to clean louvered windows, vertical blinds, glass shelves and wooden shutters. Simply scrub with the Tricket double washer then squeegee off with the Tricket double squeegee. Each tool works both sides at the same time. Squeegee blades and washers are replaceable.

INSTRUCTIONS FOR CLEANING LOUVERED WINDOWS:

Wash with the sponge pads, back and forth, until dirt is dissolved. With the squeegee blades, start from the right and move in one single stroke across to the other side. Do not press too hard. If necessary to repeat with the squeegee, be sure to wet each time. For best results, use one stroke, without stopping.

ADJUSTMENT FOR THICKNESS OF GLASS:

1. Loosen the wingnut.

2. Place the squeegee on each side of surface to be cleaned.

3. Grasp the squeegee blade between the thumb and forefinger and press together.

4. Tighten the wingnut and you have the right adjustment.

$69.95

Anti Snag Pole Hose Connector

Hose Tail Fits 5-6mm Pole Hose

SKU: WFASPHC

Brand: WCW

Connect Hose Straight to a Tap!

Twin Tank 2 x 8 litre DI Pure Water System

*** NEW *** This new system from Window Cleaning World maximises the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.

SAVE ON Resin Costs by up to 30%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used.  Please note that the flow rate is not accurate as it is designed for flows between 3-100 lytr/min.  Typical WFP use is about 1-2 litres/min.  After a while you will be able to gauge resin use better by the flow totals.  Keep a record...
• Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$11.90

Metal 8mm Push Fit Valve

8mm

SKU: GDFV

Brand: Gardiner Pole Systems

Control Your Flow!

Moerman Ultimate Excelerator 2.0 FliQ Bundle

The F*LIQ Excelerator 2.0 squeegee allows you to reach the glass virtually from any angle. The London Cleaning Show 2019 award-winning Excelerator 2.0 squeegee handle with its redesigned gripping jaw allowing for deeper reach when closing out a window. The F*LIQ pad is clipped onto the Liquidator 2.0 channel and pivots into the desired position. It is lightweight and easy to control. The F*LIQ pad has extra padding and features a thick microfiber pile for excellent water retention and scrubbing power.

• Redesigned gripping jaw allowing for deeper reach when closing out a window.
• Extreme angle range: -20° | -5° | +10° | +25° | +40°
• The negative angles and thinner jaw allow for easier closing out.
• New channel locking mechanism, more user-friendly and secure.
• Mount the channel without any risk of it falling out.
• Improved locking button to change your handle from a swivel to a fix tool.
• Redesigned grip which allows for a more ergonomic hold.
• F*LIQ washer pad.

$20.00

8mm Push Fit Stem - 6mm Barbed Hose Tail Adaptor

8mm-6mm

SKU: WF8mmHT6mm

Brand: WCW

Use to make Streamline Poletube

Twin Tank 2 x 8 litre DI Pure Water System

*** NEW *** This new system from Window Cleaning World maximises the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.

SAVE ON Resin Costs by up to 30%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used.  Please note that the flow rate is not accurate as it is designed for flows between 3-100 lytr/min.  Typical WFP use is about 1-2 litres/min.  After a while you will be able to gauge resin use better by the flow totals.  Keep a record...
• Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$5.00

Stainless Steel RO Filter Housing 4x40"

40" Stainless RO Housing

SKU: EWPROHOUSING40

Compatible with 40" RO Membrane

$235.00

WCW Aluminium Trolley single tank upgrade kit

Brackets & base pan to convert twin trolley for single

SKU: WCWSINGUPGRADE_kit

Brand: WCW

Twin Tank 2 x 8 litre DI Pure Water System

*** NEW *** This new system from Window Cleaning World maximises the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.

SAVE ON Resin Costs by up to 30%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used.  Please note that the flow rate is not accurate as it is designed for flows between 3-100 lytr/min.  Typical WFP use is about 1-2 litres/min.  After a while you will be able to gauge resin use better by the flow totals.  Keep a record...
• Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$60.00

120aH Lithium Ion Power Pack with 20A Charger

Power your Xion RO all day

SKU: XIONLPP120aH

Brand: Xion

Twin Tank 2 x 8 litre DI Pure Water System

*** NEW *** This new system from Window Cleaning World maximises the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.

SAVE ON Resin Costs by up to 30%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used.  Please note that the flow rate is not accurate as it is designed for flows between 3-100 lytr/min.  Typical WFP use is about 1-2 litres/min.  After a while you will be able to gauge resin use better by the flow totals.  Keep a record...
• Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$950.00