21" RO Membrane

21" RO Membrane

SKU: EWPROULP11-4021

Fits 21" RO Stainless Housing

Dual Inline TDS Meter

• Install inline to your DI or RO System for constant TDS readings
• One channel for input water and one for output water

$235.00

15M Pole Hose Kit

Choose your Attachments

SKU: WFPHK15

25L DI Tank

• 25L DI tank holds 25L of resin
• Make your own DI or customise an existing setup!
• Sold as a complete tank with riser tube, head and riser tube top and bottom baskets complete ready for plumbing to be installed onto
• 35" riser tube
• 8x35" DI Tank, 2.5" Opening
• 3/4" Ports suitable to 20mm plumbing fittings

From $39.50

20M Pole Hose Kit

Choose your Attachments

SKU: WFPHK20

25L DI Tank

• 25L DI tank holds 25L of resin
• Make your own DI or customise an existing setup!
• Sold as a complete tank with riser tube, head and riser tube top and bottom baskets complete ready for plumbing to be installed onto
• 35" riser tube
• 8x35" DI Tank, 2.5" Opening
• 3/4" Ports suitable to 20mm plumbing fittings

From $44.50

4L Tank

Tank, Head, Riser Tube with Top and Bottom Baskets

SKU: 4LTANK_1_Both

Twin Tank 2 x 19 litre DI Pure Water System

*** NEW *** This new system from Window Cleaning World maximises the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.

SAVE ON Resin Costs by up to 30%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• Perfect for large crews, can handle upto 4 poles at once (depending on mains tap pressure and amount of hose used)
• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than just about any DI system in the marketplace today
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used.  Please note that the flow rate is not accurate as it is designed for flows between 3-100 lytr/min.  Typical WFP use is about 1-2 litres/min.  After a while you will be able to gauge resin use better by the flow totals.  Keep a record...
• Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 39 litres to fill both tanks

From $80.00

Dual TDS Probe Ports

These help install 2 sensors for the Dual TDS meter

SKU: MCParts

Dual Inline TDS Meter

• Install inline to your DI or RO System for constant TDS readings
• One channel for input water and one for output water

$15.00

DI Tank Components

Replacement Parts

SKU: TANKPARTS

25L DI Tank

• 25L DI tank holds 25L of resin
• Make your own DI or customise an existing setup!
• Sold as a complete tank with riser tube, head and riser tube top and bottom baskets complete ready for plumbing to be installed onto
• 35" riser tube
• 8x35" DI Tank, 2.5" Opening
• 3/4" Ports suitable to 20mm plumbing fittings

$0.00