Wagtail Orbital Aluminium Squeegee - Complete

12" - 30" (30cm-75cm)

SKU: WAGOS

Brand: Wagtail Cleaning Tools

Great for Precision Polework

Gardiner Protecta-Ball

• Protecta-Ball™ to fit onto your pole hose. Safely protects and extends the life of the EZ Snap™ end stops when in use. Also prevents unwanted catching and releasing on uneven surfaces and helps connectors run around corners and steps.

From $22.50

8 Litre Lift & Carry DI Pure Water System Kit

8L Kit

SKU: WPDI8COMPLETEKIT

Brand: WCW

Small System, Perfect for Houses

Twin Tank 2 x 8 litre DI Pure Water System

*** NEW *** This new system from Window Cleaning World maximises the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.

SAVE ON Resin Costs by up to 30%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used.  Please note that the flow rate is not accurate as it is designed for flows between 3-100 lytr/min.  Typical WFP use is about 1-2 litres/min.  After a while you will be able to gauge resin use better by the flow totals.  Keep a record...
• Please note: Combo TDS Meter and the Dual TDS Meter are NOT waterproof. DO not leave exposed to the weather, on the back of a ute for example. The electronics also cannot handle direct sunlight. Cover with a cloth or keep in the shade
• Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$220.00

12.5L Tall DI Lift & Carry System Kit

12.5L Tall Kit

SKU: WPDI12.5TALLCOMPKIT

Brand: WCW

Add Resin and a TDS Meter Here

$295.00

Complete Package for 2 Story Buildings

Pole, 8L Tank and All Attachments

SKU: CLX22COMPLETEPACK

Brand: Gardiner Pole Systems

NWC House Wash is a highly concentrated quality soap with degreasing properties.

It's made specifically for washing the exterior of homes and other buildings. Works best when combined with a light SH solution.

• For best results dilute 1:75 with water/sh solution. Ratio may be increased to 1:50 tackle particularly dirty jobs.
• Apply and allow time to dwell. Then wash and rinse with high volume, low pressure.

Avoid allowing to dry on glass or colorbond.

From $699.00

Pure Coconut Carbon Chloramine Reduction Filter 10"x2.5"

Highly recommended for RO Systems

SKU: WPCRC10

Brand: WCW

$29.50

8 Litre Lift & Carry DI Pure Water System Kit

8L Kit

SKU: WPDI8COMPLETEKIT

Brand: WCW

Small System, Perfect for Houses

Twin Tank 2 x 8 litre DI Pure Water System

*** NEW *** This new system from Window Cleaning World maximises the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.

SAVE ON Resin Costs by up to 30%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used.  Please note that the flow rate is not accurate as it is designed for flows between 3-100 lytr/min.  Typical WFP use is about 1-2 litres/min.  After a while you will be able to gauge resin use better by the flow totals.  Keep a record...
• Please note: Combo TDS Meter and the Dual TDS Meter are NOT waterproof. DO not leave exposed to the weather, on the back of a ute for example. The electronics also cannot handle direct sunlight. Cover with a cloth or keep in the shade
• Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$220.00

WCW Aluminium Trolley for Single Tanks

For 7in or 8in DI/Scuba Tanks, D/E size gas bottles

SKU: WCWTRSING_KIT

Brand: WCW

Twin Tank 2 x 8 litre DI Pure Water System

*** NEW *** This new system from Window Cleaning World maximises the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.

SAVE ON Resin Costs by up to 30%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used.  Please note that the flow rate is not accurate as it is designed for flows between 3-100 lytr/min.  Typical WFP use is about 1-2 litres/min.  After a while you will be able to gauge resin use better by the flow totals.  Keep a record...
• Please note: Combo TDS Meter and the Dual TDS Meter are NOT waterproof. DO not leave exposed to the weather, on the back of a ute for example. The electronics also cannot handle direct sunlight. Cover with a cloth or keep in the shade
• Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$189.50

21" RO Membrane

21" RO Membrane

SKU: EWPROULP11-4021

Fits 21" RO Stainless Housing

Twin Tank 2 x 8 litre DI Pure Water System

*** NEW *** This new system from Window Cleaning World maximises the amount of pure water you get from your resin.

Comes with the NEW WCW Aluniumium Trolley - Lightweight and easy to grab and lift, very ergonomic design.

SAVE ON Resin Costs by up to 30%

Never get caught on a job with a failing DI tank again - You will always have one tank in reserve.

• No longer do you have to throw away resin when it produces a TDS of about 30 (when it starts to produce spotting) It is still removing most of the disolved salts and sending pre filtered water to Tank No. 2
• Instead keep using the resin in Tank No.1 until it is completely exhausted and stops reducing the Input TDS.
• Then renew the resin and put Tank No.2 in the No.1 position and the fresh resin tank in the No. 2 position
• Effectively doubles the"column height" of the resin, thus working far more efficiently than a "squat" 12.5 ltr system
• No tools required for removing tanks for resin change - it is a simple 10 minute job.
• Includes a Combo TDS/Flow meter to monitor the TDS on tank 1 and keeps a tally of water used.  Please note that the flow rate is not accurate as it is designed for flows between 3-100 lytr/min.  Typical WFP use is about 1-2 litres/min.  After a while you will be able to gauge resin use better by the flow totals.  Keep a record...
• Please note: Combo TDS Meter and the Dual TDS Meter are NOT waterproof. DO not leave exposed to the weather, on the back of a ute for example. The electronics also cannot handle direct sunlight. Cover with a cloth or keep in the shade
• Dual TDS meter measures Tap water (after prefiltration) and also the final tank 2 output.
• Includes 2 separate pre-filters - sediment and carbon filters
• Inlets and outlet fitting swivel in all directions - stops hoses from kinking
• Excludes DI Resin - needs 16 litres to fill both tanks

$235.00