O-Clip Pliers

Tighten O-Clips

SKU: WFPINCER

Brand: WCW

Tighten Fittings onto Tube

$14.50

Gardiner Protecta-Ball

Protect Your Tap!

SKU: WFRB

Brand: WCW

Small or Large!

Stainless Steel O-Clamps for Pole tubing and small gauge hoses.

• Select 9.5 for normal 8mm OD pole tube
• Select 10.5 for Gardiner reinforced pole tube
• Select 12.5 for 6mm ID Gardiner Microbore Hose
• Select 14.5 for 8mm ID Gardiner Minibore Hose

Use Tower Pincers to clamps them tight

From $2.50

Gardiner Minibore 8mm Hose - 100m coil

8mm - 100 Metres

SKU: GDH8mm100m

Brand: Gardiner Pole Systems

High Flow Rate

X-ION Lite RO Pure Water System

• Robust and affordable RO filter for Water-Fed Window Cleaning 
• Simple design and easy to use
• Excellent for a single water-fed pole setup in High TDS areas of Australia. Western and South Aus, for example.

Operation 

• Supply water is first filtered through the 10in Sediment and Carbon pre-filters
• The water is then filtered through the 40in RO membrane to remove 95%+ of the TDS from the water
• The water is finally filtered down to 0 TDS with the 6L DI Tank

Features

• The 6L DI tank comes pre-filled with 6L of DeIonising Resin
• The 6L DI tank can quickly be detached for use separately from the RO
• Quickly disconnect the hose to use RO-only water 

FAQ's

How often do I need to replace the membrane?

• You can expect 2+ years of use from the RO Membrane with proper use and maintenance.

When do I need to replace the resin?

• When the water reads higher than 20ppm coming from the DI tank 

How often do I need to replace the Sediment and Carbon pre-filters? 

• Regularly inspect the filters - They will turn completely brown and need replacing, this will vary with differing water sources

What hoses can I use with the X-ION Lite RO?

• As the system is reliant on tap pressure, we recommend using hoses with an ID of 8mm or larger to maximize flow to the pole tube - Excessively long or small diameter hoses can dramatically affect the flow and pressure 

 

$195.00

Red Clip Push-Fit T Connector for Quik-LoQ

Locking C-clip for 8mm push fits

SKU: GDPFRedClip

Brand: Gardiner Pole Systems

Verdi SuperFlex Pole Hose Kit - 15m

• Premium pole hose that lays flat on the ground and is very flexible, yet tough
• Comes with 12mm quick connect - generic garden hose style connection 
• Comes with an 8mm push-fit valve (black valve or blue and grey valve) and Foam protector ball

 

$0.20

O-Clip Plated Steel Crimp for Hose

Various sizes

SKU: WFO-7-9

Brand: WCW

Verdi SuperFlex Pole Hose Kit - 15m

• Premium pole hose that lays flat on the ground and is very flexible, yet tough
• Comes with 12mm quick connect - generic garden hose style connection 
• Comes with an 8mm push-fit valve (black valve or blue and grey valve) and Foam protector ball

 

$1.00

O-Clip Pliers

Tighten O-Clips

SKU: WFPINCER

Brand: WCW

Tighten Fittings onto Tube

$14.50

Pro 26 Female End Stop 8mm Barb

Professional Grade hose fitting

SKU: GDP26FES8mm

Brand: Gardiner Pole Systems

Anti Snag Pole Hose Connector

• Gardena style male snap fitting
• Hose tail fits 5mm ID pole tube
• Use 9.5mm - 10.5mm O-clips to clamp tube on

$15.00

8mm Push-Fit to Hose connector

8mm Pole Tube to Garden Hose

SKU: WFPFPHC8mm

Brand: WCW

Anti Snag Pole Hose Connector

• Gardena style male snap fitting
• Hose tail fits 5mm ID pole tube
• Use 9.5mm - 10.5mm O-clips to clamp tube on

$12.00

Premium 8mm Push Fit Valve Blue

8mm

SKU: WF8mmValveBlue

Gardiner Powerwash Pole Adaptor

• Alloy Adapter to fit the #2 section on a Gardiner pole to allow the fitting of pressure washing and soft washing fittings and attachments
• 1/4" BSP Female top screw thread
• 3/8" BSP Female base thread
• 76g

Fitting Instructions

• Remove the #1 section from a Gardiner pole of the needed length
• Slide your high pressure power wash hose with 3/8" Male BSP thread end up the pole and out of the #2 clamp at the top
• Connect the hose end fitting to the base thread on the adapter (recommended to use PTFE tape)
• Push the adapter back in to the #2 clamp and close the clamp lever to hold it in place
• Now screw in the powerwash head attachment with suitable 1/4" male thread connection
• Extend pole to desired height and start pressure or soft washing

$6.00

Uni-Valve for 8mm Pole Tube

Easy Flow Control for WFP

SKU: UNIVALVE_KITS

Anti Snag Pole Hose Connector

• Gardena style male snap fitting
• Hose tail fits 5mm ID pole tube
• Use 9.5mm - 10.5mm O-clips to clamp tube on

From $99.00

Quick Connect Block Off

Easy way to seal up your Di or RO

SKU: WFQCBO

Stainless Steel O-Clamps for Pole tubing and small gauge hoses.

• Select 9.5 for normal 8mm OD pole tube
• Select 10.5 for Gardiner reinforced pole tube
• Select 12.5 for 6mm ID Gardiner Microbore Hose
• Select 14.5 for 8mm ID Gardiner Minibore Hose

Use Tower Pincers to clamps them tight

$8.50

Claber Tap Smooth Adaptor

Adaptor w. Rubber Sleeve

SKU: CLTARUB

Brand: Claber

Stainless Steel O-Clamps for Pole tubing and small gauge hoses.

• Select 9.5 for normal 8mm OD pole tube
• Select 10.5 for Gardiner reinforced pole tube
• Select 12.5 for 6mm ID Gardiner Microbore Hose
• Select 14.5 for 8mm ID Gardiner Minibore Hose

Use Tower Pincers to clamps them tight

$10.00

Gardiner 100 deg Fan Jets (x2)

100 Degrees

SKU: GDFJ100

Brand: Gardiner Pole Systems

Gardiner Xtreme Sill Flocked Brush - 10in 

• The Xtreme Sill brush is the lightest sill brush to date.
• The mold of the brush has been minimized to reduce weight, while still allowing the brush to have bristles in all of the right places.
• Lightweight Xtreme Sill brush
• Good for cold and warm water.
• Only 140 grams - excellent for high-level pole work.
• Features the Gardiner Pencil Jet Capsule System
• Optional clip-on brush bumpers to protect the brush against frames - scroll down for the quick link
• Comes with 2x 2mm pencil jet capsules, jet hose and T Connector

$10.00